On Thu, 23 Jan 2003, Guido van Rooij wrote:

> On Thu, Jan 23, 2003 at 09:09:23AM -0800, Clayton Fiske wrote:
> > Think about it from a routing perspective. How would a packet with a
> > destination address of 10.x.x.x (pre-NAT) reach your firewall? Does
>
> If you have e.g. a cable modem, there is a LAN on the outside....
> (provided no PPPoE is used).
>
> -Guido

Precisely why you need to block those private IP ranges. You don't want
anything form the cable modem network to come in.  In my case, I
block in everything coming in from non routable addresses, and everything
leaving to non routable addresses.

Cable modem uses DHCP, but the initial address fetch uses ethernet
broadcasts, so IPF never touches the packets.  Once I have an address, I
have the DHCP client run a script that adds a stateful filter rule that
allows UDP packets from my address port 68 to the DHCP server address port
67.

I also allow the ICMP echos from the DHCP server, so that it does not give
out my IP address to someone else.

Back on topic - I think Guido was trying to say that packets from internal
non routable addresses will never reach the external interface.

Marco Radzinschi

E-Mail: [EMAIL PROTECTED]

Fri Jan 24 00:00:14 EST 2003

Reply via email to