I am running Solaris 8.
I checked up the url u sent before itself.It didnt work.Rather i use
precompiled ipf binaries.
I did try unplumbing hme1 & try, it didnt work.

-----Original Message-----
From: Martynas Buozis [mailto:[EMAIL PROTECTED]
Sent: Monday, March 31, 2003 5:23 PM
To: rmkml
Cc: Ipfilter1 (E-mail)
Subject: Re: Unknown Layer 2 header sizefor type 5


Hello


Thank you for a tip. I will try to recompile ipf. Seems like this should 
work ...

WBR
Martynas


rmkml wrote:
> Hi,
> 
> I found this :
> http://false.net/ipfilter/2001_07/0262.html
> 
> If you have patched your solaris,
> do you unpatch your solaris and You have same warning msg ?
> 
> Regard.
> 
> 
> 
> Martynas Buozis wrote:
> 
> 
>>Hello
>>
>>Actually I was going to ask almost same question but Murugappan was
faster.
>>
>>I have Solaris 8. I have only one hme0 or eri0 (depends on wks)
>>available, configured and fully functional. And I also see same message
>>from IPFilter and I am very curious about it.
>>
>>Mar 25 01:46:05 local ipf: [ID 604323 kern.warning] WARNING: Unknown
>>layer 2 header size for eri0 type 0
>>Mar 25 01:46:05 local ipf: [ID 920137 kern.notice] IP Filter: attach to
>>[eri0,0] - IPv4
>>Mar 25 01:46:05 local ipf: [ID 989912 kern.notice] IP Filter: v3.4.31,
>>attaching complete.
>>
>>SunOS <hostname> 5.8 Generic_108528-18 sun4u sparc SUNW,Sun-Blade-100
>>
>>bash-2.03# ifconfig -a
>>lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
>>         inet 127.0.0.1 netmask ff000000
>>eri0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
>>         inet aaa.bbb.ccc.113 netmask ffffff00 broadcast aaa.bbb.ccc.255
>>         ether aa:bb:cc:dd:ee:ff
>>
>>We updated our kernels to 18 not long ago and I am not sure, but if I
>>correctly remember - this messages appeared after patching. But that's
>>not sure, as it can be that I missed that message earlier.
>>
>>WBR
>>MArtynas
>>
>>rmkml wrote:
>>
>>>Hi,
>>>
>>>You use Solaris 9 ?
>>>
>>>Your interface hme1 is down and no ip address ?
>>>
>>>If not view error msg, unplumb hme1 ?
>>>
>>>Regard.
>>>
>>>
>>>
>>>Murugappan Viswanath wrote:
>>>
>>>
>>>
>>>>When i start ipfilter i get the following error & nothing (ipfilter
>>>>rules) workbash-2.03# /etc/init.d/ipfboot start
>>>>Mar 31 00:34:15 gnorizo ipf: IP Filter: detaching [hme1,1] - IPv4
>>>>Mar 31 00:34:15 gnorizo ipf: IP Filter: detaching [hme0,0] - IPv4
>>>>Mar 31 00:34:15 gnorizo ipf: IP Filter: v3.4.30 detached
>>>>Set 0 now inactive
>>>>filter sync'd
>>>>Mar 31 00:34:15 gnorizo ipf: IP Filter: attach to [hme0,0] - IPv4
>>>>0 entries flushed from NAT table
>>>>0 entries flushed from NAT list
>>>>Mar 31 00:34:15 gnorizo ipf: WARNING: Unknown layer 2 header size for
>>>>hme1 type
>>>>5
>>>>Mar 31 00:34:15 gnorizo ipf: IP Filter: attach to [hme1,1] - IPv4
>>>>Mar 31 00:34:15 gnorizo ipf: IP Filter: v3.4.30, attaching complete.
>>>>filter sync'dThis is the output for my ifconfiglo0:
>>>>flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
>>>>       inet 127.0.0.1 netmask ff000000
>>>>hme0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500
>>>>index 2
>>>>       inet 172.18.0.254 netmask ffff0000 broadcast 172.18.255.255
>>>>hme1: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index
>>>>5This is the output of ipf -V# ipf -V
>>>>ipf: IP Filter: v3.4.30 (496)
>>>>Kernel: IP Filter: v3.4.30
>>>>Running: yes
>>>>Log Flags: 0 = none set
>>>>Default: pass all, Logging: available
>>>>Active list: 0M.VISWANATH
>>>>Millenium Center,
>>>>85 Kutchery Road,
>>>>Mylapore,Chennai - 600004
>>>>Phone(O) :24616768 Ext 311,313
>>>>      (R):044-24417140
>>>>Mobile :9840066012
>>>>
>>>>-----------------------------------------------------------------------
>>>>[Upgrade Your Email - Click here!]
>>>>
>>>

Reply via email to