We are trying to install ipfilter 4.1.7 on one of our Sun Fire V240s here and are having problems getting the pfil installation complete. Following the README I was able to build and install the latest pfil package (solairs make, forte 7.0). The installation of the package completed with no errors, /etc/opt/pfil/iu.ap looks correct and the reboot was clean. However when I run the strconf command ( "strconf < /dev/bge" ) I don't see pfil. The ipconfig <if> modlist and modinsert commands worked ok but I suspect the lack of the pfil in the streams list is going to be a problem. Anyone have idea what might be going on here?
Relevant data:
[EMAIL PROTECTED] /]# cat /etc/opt/pfil/iu.ap
bge -1 0 pfil
[EMAIL PROTECTED] /]# ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 128.125.253.163 netmask ffffff00 broadcast 128.125.253.255
ether 0:3:ba:82:88:8d
[EMAIL PROTECTED] /]# strconf < /dev/bge
bge
[EMAIL PROTECTED] /]# ifconfig bge0 modlist
0 arp
1 ip
2 pfil
3 bge
[EMAIL PROTECTED] /]# uname -a
SunOS wrls-app1.usc.edu 5.9 Generic_117171-05 sun4u sparc SUNW,Sun-Fire-V240
[EMAIL PROTECTED] /]# isainfo -vk
64-bit sparcv9 kernel modules
--
Chet Burgess
Manager, Enterprise Collaboration Services
Information Services Division
University of Southern California
[EMAIL PROTECTED]
213-740-5160
pgpD2vF97kHOE.pgp
Description: PGP signature
