Hello,
i use ipmitool 1.8.8 on an IBM eSeries 346
Device ID : 32
Device Revision : 0
Firmware Revision : 1.16
IPMI Version : 1.5
Manufacturer ID : 2
Manufacturer Name : Unknown (0x2)
Product ID : 3 (0x0003)
Device Available : yes
Provides Device SDRs : no
Additional Device Support :
Sensor Device
SDR Repository Device
SEL Device
FRU Inventory Device
IPMB Event Receiver
IPMB Event Generator
Chassis Device
Aux Firmware Rev Info :
0x4b
0x50
0x42
0x54
With ipmitool i try to monitor the status of the harddisks/ RAIDs and
the power supplies.
When i use the "sdr list" command i get for the two power supplies:
PS 1 Status | 0x01 | ok
PS 2 Status | 0x09 | ok
Both are shown as OK, but one of them is not connectet to the power
line. Sure the hex values are different, but i dont know what they mean.
The same goes for the disks
Status - DASD 0 | 0x01 | ok
Status - DASD 1 | 0x01 | ok
Status - DASD 2 | 0x01 | ok
Status - DASD 3 | 0x04 | ok
Status - DASD 4 | 0x01 | ok
Status - DASD 5 | 0x01 | ok
All are shown as OK, but i have a RAID5 where i pulled a disk from.
DASD3 has gone from 0x01 to 0x04 but is labeled OK.
My question is now - are there any documentations where i could find the
explanations for the hex values so i can use ipmitool in scripts ?
The C-Source of ipmitool would be hard to understand for me because i am
not a c-programmer.
regards
Jörg
--
Joerg Hartmann
Mercateo
06366 Koethen, Museumsgasse 4/5
Tel: +49 3496 512 100
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Ipmitool-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
