Hello, At work, we have some supermicro servers equipped with the AOC-LPIPMI-LANG add-on card. After some firmware flashing, I can read localy the sensors values:
[EMAIL PROTECTED] ~]# ipmitool sdr list CPU 1 | 35 degrees C | ok CPU 2 | 0 degrees C | ok SYSTEM | 27 degrees C | ok CPU1 Core | 1.42 Volts | ok CPU2 Core | 0.01 Volts | ok DIMM | 2.69 Volts | ok Battery | 3.34 Volts | ok 1.8V | 1.86 Volts | ok 3.3V | 3.34 Volts | ok 5V | 5.16 Volts | ok 12V | 12.14 Volts | ok -12V | -12.34 Volts | ok FAN1 | 5265 RPM | ok FAN2 | 5265 RPM | ok FAN3 | 5400 RPM | ok FAN4 | 0 RPM | ok FAN5 | 4320 RPM | ok FAN6 | 4185 RPM | ok FAN7/CPU1 | 0 RPM | ok FAN8/CPU2 | 0 RPM | ok Intrusion | 0 unspecified | ok Power Supply | 0 unspecified | cr Now, I would like to interrogate the sensors via the lan interface on the addon board. So, I execute these commands: ipmitool -I open lan set 1 ipaddr 10.1.5.4 ipmitool -I open lan set 1 netmask 255.255.0.0 ipmitool -I open lan set 1 defgw ipaddr 10.1.1.1 ipmitool -I open lan set 1 password ***** ipmitool -I open lan set 1 user ipmitool -I lan set 1 accesss on but, when I try to read the values [EMAIL PROTECTED] ~]# ipmitool -H 10.1.5.4 sdr Password: Error: Unable to establish LAN session ipmi_lan_send_cmd failed to open intf Get Device ID command failed Unable to open SDR for reading Thanks (please CC me, I'm not registered on the list) Fabrice ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
