Fabrice,
The username for user 1 (the default user) is NULL ("").
Andy
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Fabrice Charlier
Sent: Wednesday, October 11, 2006 3:57 AM
To: Jarrod Johnson
Cc: ipmitool-devel@lists.sourceforge.net
Subject: Re: [Ipmitool-devel] IMPI-on-Lan SuperMicro
Jarrod Johnson wrote:
> On Tue, 2006-10-10 at 17:50 +0200, Fabrice Charlier wrote:
>
>> Hello,
>>
>> At work, we have some supermicro servers equipped with the
>> AOC-LPIPMI-LANG add-on card.
>> After some firmware flashing, I can read localy the sensors values:
>>
>> [EMAIL PROTECTED] ~]# ipmitool sdr list
>> CPU 1 | 35 degrees C | ok
>> CPU 2 | 0 degrees C | ok
>> SYSTEM | 27 degrees C | ok
>> CPU1 Core | 1.42 Volts | ok
>> CPU2 Core | 0.01 Volts | ok
>> DIMM | 2.69 Volts | ok
>> Battery | 3.34 Volts | ok
>> 1.8V | 1.86 Volts | ok
>> 3.3V | 3.34 Volts | ok
>> 5V | 5.16 Volts | ok
>> 12V | 12.14 Volts | ok
>> -12V | -12.34 Volts | ok
>> FAN1 | 5265 RPM | ok
>> FAN2 | 5265 RPM | ok
>> FAN3 | 5400 RPM | ok
>> FAN4 | 0 RPM | ok
>> FAN5 | 4320 RPM | ok
>> FAN6 | 4185 RPM | ok
>> FAN7/CPU1 | 0 RPM | ok
>> FAN8/CPU2 | 0 RPM | ok
>> Intrusion | 0 unspecified | ok
>> Power Supply | 0 unspecified | cr
>>
>>
>> Now, I would like to interrogate the sensors via the lan interface on
>> the addon board.
>> So, I execute these commands:
>> ipmitool -I open lan set 1 ipaddr 10.1.5.4
>> ipmitool -I open lan set 1 netmask 255.255.0.0
>> ipmitool -I open lan set 1 defgw ipaddr 10.1.1.1
>> ipmitool -I open lan set 1 password *****
>> ipmitool -I open lan set 1 user
>> ipmitool -I lan set 1 accesss on
>>
>> but, when I try to read the values
>>
>> [EMAIL PROTECTED] ~]# ipmitool -H 10.1.5.4 sdr
>> Password:
>> Error: Unable to establish LAN session
>> ipmi_lan_send_cmd failed to open intf
>> Get Device ID command failed
>> Unable to open SDR for reading
>>
>>
>> Thanks
>>
>> (please CC me, I'm not registered on the list)
>>
>> Fabrice
>>
>>
>>
>>
>>
>>
------------------------------------------------------------------------
-
>> Take Surveys. Earn Cash. Influence the Future of IT
>> Join SourceForge.net's Techsay panel and you'll get the chance to
share your
>> opinions on IT & business topics through brief surveys -- and earn
cash
>>
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDE
V
>> _______________________________________________
>> Ipmitool-devel mailing list
>> Ipmitool-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
>>
>
> Try something along the lines of:
> ipmitool -I lan -H 10.1.5.4 -U userid -P password sdr
>
>
>
Ok, but what is the value of "userid" ? I just defined a password, not
an user ... or I don't understand something ;-)
------------------------------------------------------------------------
-
Using Tomcat but need to do more? Need to support web services,
security?
Get stuff done quickly with pre-integrated technology to make your job
easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache
Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Ipmitool-devel mailing list
Ipmitool-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Ipmitool-devel mailing list
Ipmitool-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
