Al Chu wrote:
>> The server is configured for XXX.XXX.XXX.206, so to avoid any 
>> potential conflicts, I'm going to set the BMC for XXX.XXX.XXX.205 
> 
> This is just a guess.  Since you use a different IP address than the
> node, maybe XXX.XXX.XXX.205 hasn't been resolved to the right MAC
> address.  You can check your ARP cache via /sbin/arp.  If it isn't, you
> might want to see if gratuitous arps are turned on in your BMC
> configuration.

It doesn't show up when I run arp, but it also doesn't look like turning 
on gratuitous arps has any effect on this card. At least if it does, 
it's not reflected in the "print" command:

===========================================

[EMAIL PROTECTED] ipmitool lan set 2 arp generate on

[EMAIL PROTECTED] ipmitool lan print 2
Set in Progress         : Set Complete
Auth Type Support       : NONE MD5 PASSWORD
Auth Type Enable        : Callback : NONE MD5 PASSWORD
                         : User     : NONE MD5 PASSWORD
                         : Operator : NONE MD5 PASSWORD
                         : Admin    : NONE MD5 PASSWORD
                         : OEM      : NONE MD5 PASSWORD
IP Address Source       : Static Address
IP Address              : XXX.XXX.XXX.205
Subnet Mask             : 255.255.255.0
MAC Address             : 00:a0:d1:e5:d1:8b
SNMP Community String   : public
IP Header               : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10
Default Gateway IP      : XXX.XXX.XXX.1
802.1q VLAN ID          : Disabled
802.1q VLAN Priority    : 0
RMCP+ Cipher Suites     : 0,1,2,3
Cipher Suite Priv Max   : Not Available

=========================================

Also, I probably should have mentioned that I originally tried setting 
this up using the same IP address as eth0 (XXX.XXX.XXX.206). It was only 
after that failed that I started trying a separate IP address (.205). 
The errors were the same whether I used .206 or .205.




-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Ipmitool-devel mailing list
Ipmitool-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ipmitool-devel

Reply via email to