All,
I'm trying to get Serial-over-LAN working on my DL140 G3 and simply
can't get it to work. I can't seem to find any tools from HP that would
let me check it's set up properly in the first place but I think
everything is correct:
[EMAIL PROTECTED] ~ $ ipmitool -I lanplus -H ip-250 -U admin shell
Password:
ipmitool> channel info 2
Channel 0x2 info:
Channel Medium Type : 802.3 LAN
Channel Protocol Type : IPMB-1.0
Session Support : multi-session
Active Session Count : 1
Protocol Vendor ID : 7154
Volatile(active) Settings
Alerting : enabled
Per-message Auth : enabled
User Level Auth : enabled
Access Mode : always available
Non-Volatile Settings
Alerting : enabled
Per-message Auth : enabled
User Level Auth : enabled
Access Mode : always available
ipmitool> sol info 2
Info: SOL parameter 'Payload Channel (7)' not supported - defaulting to 0x02
Set in progress : set-complete
Enabled : true
Force Encryption : false
Force Authentication : false
Privilege Level : ADMINISTRATOR
Character Accumulate Level (ms) : 100
Character Send Threshold : 80
Retry Count : 7
Retry Interval (ms) : 2500
Volatile Bit Rate (kbps) : IPMI-Over-Serial-Setting
Non-Volatile Bit Rate (kbps) : 115.2
Payload Channel : 2 (0x02)
Payload Port : 623
Whenever I try to activate SOL, however, it complains:
[EMAIL PROTECTED] ~ $ ipmitool -I lanplus -H ip-250 -U admin sol activate
Password:
Info: cannot activate SOL payload with encryption
If it helps, it appears the iLO 100 is actually a ServerEngines
management chip:
dmesg:
input: ServerEngines SE USB Device as /class/input/input0
input: USB HID v1.11 Keyboard [ServerEngines SE USB Device] on
usb-0000:00:1d.2-1
input: ServerEngines SE USB Device as /class/input/input1
input: USB HID v1.11 Mouse [ServerEngines SE USB Device] on
usb-0000:00:1d.2-1
lspci:
15:02.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e
[Pilot] ServerEngines (SEP1) (rev 02)
ipmitool> mc info
Device ID : 18
Device Revision : 1
Firmware Revision : 2.12
IPMI Version : 2.0
Manufacturer ID : 11
Manufacturer Name : Unknown (0xb)
Product ID : 8193 (0x2001)
Device Available : yes
Provides Device SDRs : no
Additional Device Support :
Sensor Device
SDR Repository Device
SEL Device
FRU Inventory Device
IPMB Event Receiver
Bridge
Chassis Device
Aux Firmware Rev Info :
0x00
0x00
0x00
0x00
Does anyone have any idea?
Many thanks,
Chris
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Ipmitool-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
