IHAC who got the error listed below. Could someone please look at this and reply.
With Enterprise 4 linux (x86_64), I'm trying to configure the SP using ipmitool on a SUN SB6000 intel blade >l. Almost everything works fine. However, when I try the following command: > >ipmitool user set name 2 CSL > >...I get the error > >Set User Name command failed (user 2, name CSL): Unspecified error > >From that point forward, I can't access the blade LOM, either from ssh, or the > > web gui, or ipmitool (locally or using the lan/lanplus protocols). I also > > ca > >n't shut down the host, nor can I reset the blade LOM using the chassis ILOM > >( > >reset /CH/BL0/SP). All I can do is power down the blade using the little > >powe > >r button on the front of the blade, and then pull the blade to remove power > >fr > >om the blade LOM. Then when I power everything back up, it's all good > >again, > >as long as I don't try to run the command above again. > > ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
