> > > Is there a way to set the IPMI trap receivers with ipmitool 1.8.9? > There the field for the SNMP community but nothing else. > This is specific to Supermicro machines where their IPMIView > tool allows to set three receivers (and their MAC addresses). >
For SNMP Alerting to work, you have to set up: # Event Filter Table entry - with wildcard or sensor specific # Alert Policy Table entries - one for each Trap destination, referencing the Event filter table entry (Policy number) as well as the Lan destination(s) (Destination Selector). # LAN destination Table entries (one for each Trap destination) Also make sure, that # Global PEF is enabled # Channel Alerting for the LAN channel is enabled. Some BMC's might help you in the process by providing a GUI to this (quite complex)configuration. Good luck, Holger ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
