> > Hi, > After getting ipmitool working well on another system, I am > trying to now get it working on a HP DL145 G2 1U server. > Everything looks good (sensor data etc), except getting the > FRU information. The response to the FRU command is of an > incorrect header version. > > FRU DATA (9 bytes) > 08 ff ff ff ff ff ff ff ff > Unknown FRU header version 0xff >
The FRU (EEPROM) seems to contain no data. This is typically written during manufacturing by the OEM/vendor, but this is not mandatory. Holger > > ipmitool is running on a Sun Sparc box, running Solaris 10. > I have tried both the included 1.8.8, and the latest cvs > version. Results are the same, and the captures below are > from the 1.8.8 version. > I was wondering if the capture is indicating that there is no > FRU info to be found, despite the mc record indicating otherwise? > > > Thanks, > > Matt > ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
