On Thu, Apr 03, 2008 at 08:37:29PM +0530, Viswanath Thangamuthu, Bangalore wrote: > > Hi , > > > > I have installed Super micro V2.0 card on our system to monitor system > health. But I wondered that, processor fan is showing 0 RPM.There are > couple of fan entries and my interest is about processor fan only. why > fan4 is only showing some non-zero value?. What is fan4?. Pls clarify me > on this. Thanks in advance. > > > > #ipmitool sdr list > > > > CPU | 22 degrees C | ok > CPU Core | 1.22 Volts | ok > DIMM | 1.81 Volts | ok > 3.3V | 3.36 Volts | ok > 5V | 4.90 Volts | ok > 5VSB | 4.94 Volts | ok > 12V | 11.71 Volts | ok > -12V | -12.38 Volts | ok > Battery | 3.25 Volts | ok > FAN1 | 0 RPM | ok > FAN2 | 0 RPM | ok > FAN3 | 0 RPM | ok > FAN4 | 5130 RPM | ok > FAN5 | 0 RPM | ok > FAN6/CPU | 0 RPM | ok > Intrusion | 0 unspecified | ok > Power Supply | 0 unspecified/u | cr
The mainboard has 5 sockets/connectors for fans (at least, since only those which provide a sensor pin are counted). The mapping of fans to sockets (and therefore, sdrs) is done by *wires*. The only way to find out is to open the case and have a look (and get the mainboard manual to identify the connectors) S -- Steffen Grunewald * MPI Grav.Phys.(AEI) * Am Mühlenberg 1, D-14476 Potsdam Cluster Admin * http://pandora.aei.mpg.de/merlin/ * http://www.aei.mpg.de/ * e-mail: steffen.grunewald(*)aei.mpg.de * +49-331-567-{fon:7233,fax:7298} No Word/PPT mails - http://www.gnu.org/philosophy/no-word-attachments.html ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
