Hi, I have FSC-1501 motherboard and ipmi does not detect fans RPM here.
Is there any way to make it work? Here is a log from ipmi-si initialization: ====================================== ipmi message handler version 39.1 IPMI System Interface driver.ipmi_si: Trying SMBIOS-specified smic state machine at i/o address 0xca9, slave address 0x20, irq 0 IPMI message handler: guid_handler: The GUID response from the BMC was too short, it was 16 but should have been 17. Assuming GUID is not available.
ipmi: Found new BMC (man_id: 0x002b99, prod_id: 0x0002, dev_id: 0x20) IPMI smic interface initialized ipmi device interface And sensors list: ======================================= [EMAIL PROTECTED] ~]# ipmitool sensor listCPU Status | 0x0 | discrete | 0x8000| na | na | na | na | na | na CPU Temp | 35.000 | degrees C/unspe | ok | -129.000 | -129.000 | -129.000 | 72.000 | 75.000 | -129.000 CPU Vol | 1.540 | Volts/unspecifi | ok | 1.039 | 1.333 | 1.363 | 1.687 | 1.716 | 1.952 Baseboard Temp | 31.000 | degrees C/unspe | ok | -129.000 | -129.000 | -129.000 | 80.000 | 85.000 | -129.000 Inlet Temp | 24.000 | degrees C/unspe | ok | -129.000 | 0.000 | 5.000 | 36.000 | 40.000 | -129.000 3.3V | 3.376 | Volts/unspecifi | ok | 0.000 | 2.896 | 2.960 | 3.632 | 3.696 | 0.000 5V | 5.057 | Volts/unspecifi | ok | 0.000 | 4.385 | 4.492 | 5.488 | 5.595 | 0.000 12V | 11.956 | Volts/unspecifi | ok | 0.000 | 10.492 | 10.797 | 13.237 | 13.420 | 0.000 5V Standby | 4.950 | Volts/unspecifi | ok | 0.000 | 4.368 | 4.493 | 5.491 | 5.616 | 0.000 3V CMOS battery | 2.912 | Volts/unspecifi | ok | 0.000 | 2.656 | 2.704 | 3.456 | 3.584 | 0.000 USB FUSE | 0x0 | discrete | 0x0000| na | na | na | na | na | na
sensor CPU Fan non-linear! sensor System Fan 3 non-linear! sensor PSU1 Fan non-linear! sensor PSU2 Fan non-linear!Chassis Intrus | 0x0 | discrete | 0x0000| na | na | na | na | na | na WatchDog | na | discrete | na | na | na | na | na | na | na Event Disable | na | discrete | na | na | na | na | na | na | na NVRAM Checksum | na | discrete | na | na | na | na | na | na | na BMC I2C | na | discrete | na | na | na | na | na | na | na EMP | na | discrete | na | na | na | na | na | na | na Fatal NMI | na | discrete | na | na | na | na | na | na | na
Unable to send command: Invalid argument Error reading sensor POST Error (#01) Unable to send command: Invalid argument Error reading sensor Password (#02) Unable to send command: Invalid argument Error reading sensor Sys Event (#03) Unable to send command: Invalid argument Error reading sensor Memory Resize (#04) Unable to send command: Invalid argument Error reading sensor Sys Boot Init (#05) Unable to send command: Invalid argument Error reading sensor Memory ECC (#01) Unable to send command: Invalid argument Error reading sensor PCI Error (#02)PSU Status | 0x0 | discrete | 0x0100| na | na | na | na | na | na
Unable to send command: Invalid argument Error reading sensor Critical System (#05)PSU Unit | na | discrete | na | na | na | na | na | na | na Predict CPU Fan | 0x0 | discrete | 0x0000| na | na | na | na | na | na PredictSysFan 3 | 0x0 | discrete | 0x0000| na | na | na | na | na | na Predict PSU1Fan | 0x0 | discrete | 0x0000| na | na | na | na | na | na Predict PSU2Fan | 0x0 | discrete | 0x0000| na | na | na | na | na | na
This is on system: [EMAIL PROTECTED] /tmp]# uname -a Linux pldmachine 2.6.22.19-5 #1 SMP Mon Mar 17 07:58:08 UTC 2008 i686 Intel(R)_Pentium(R)_4_CPU_2.00GHz PLD Linux [EMAIL PROTECTED] ~]# ipmitool -V ipmitool version 1.8.9 This motherboard have BMC with: • Interrupt-Controller Chipset: Winbond W83910F and W24100S • EEPROM 2 Mbyte (Winbond W39F010P) (Source: http://manuals.fujitsu-siemens.com/serverbooks/content/manuals/english/1501th-e.pdf) Here is a link to datasheet of this chip: http://www.datasheetcatalog.com/datasheets_pdf/W/8/3/9/W83910F.shtml Thanks, -- Lukasz Michalski pgp key: http://www.zork.pl/lm.asc
signature.asc
Description: OpenPGP digital signature
------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
