Hi Mark, The SDR can change during a firmware update or something similarly (new motherboard rev, etc.). In FreeIPMI, I check the SDR version number and timestamps to verify if cached SDR data is valid/invalid.
I assume the same could be done with the output from 'sdr info'. Al On Mon, 2008-07-07 at 13:15 -0400, Mark Seger wrote: > I want to be able to run ipmitool -S from a script that for all intents > and purposes runs forever. If I create the dump file once is that > sufficient or are these cases when it would be invalid and need to be > refresh? > -mark > > > > ------------------------------------------------------------------------- > Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! > Studies have shown that voting for your favorite open source project, > along with a healthy diet, reduces your potential for chronic lameness > and boredom. Vote Now at http://www.sourceforge.net/community/cca08 > _______________________________________________ > Ipmitool-devel mailing list > Ipmitool-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/ipmitool-devel -- Albert Chu [EMAIL PROTECTED] 925-422-5311 Computer Scientist High Performance Systems Division Lawrence Livermore National Laboratory ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
