Carsten Aulbert wrote: > Hi all, > > another question just waited for us in the darkness and jumped right > into our faces. When we boot a machine we cannot follow the boot process > through the end but it just stops at some point and we have no idea why. > Can anyone enlighten us please? > > Cheers > > Carsten > > Boot line: > append root=/dev/nfs > nfsroot=/srv/fai/nfsroot/live/filesystem.dir,v3,tcp,rsize=32768,wsize=32768 > ip=::::::dhcp nofb console=ttyS1,19200 > FAI_FLAGS=verbose,sshd,createvt,reboot FAI_ACTION=install > > Output during SOL session: > ... > [ 5.606545] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI > [ 5.645115] Copyright (c) 1999-2006 Intel Corporation. > [ 5.675922] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 > [ 5.712406] e1000e: Copyright (c) 1999-2008 Intel Corporation. > [ 5.747336] e1000e 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> > IRQ 16 > [ 5.916141] 0000:0d:00.0: eth0: (PCI Express:2.5GB/s:Width x1) > 00:30:48:9b:9b:b0 > [ 5.960403] 0000:0d:00.0: eth0: Intel(R) PRO/1000 Network Connection > [ 5.998582] 0000:0d:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff > [ 6.035625] e1000e > > that's the end...
Does the SOL share the same network interface as used by the OS? I've see cases where SOL will be dropped when the OS loads/uses the NIC driver. On dual NIC machines, we use the 2nd NIC for the OS and leave the first NIC for IPMI James Pearson ------------------------------------------------------------------------------ Check out the new SourceForge.net Marketplace. It is the best place to buy or sell services for just about anything Open Source. http://p.sf.net/sfu/Xq1LFB _______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
