hello, I have 3 Lenovo Thinkservers, I am going to start sol
I did everything what was wrote on this url, http://publib.boulder.ibm.com/infocenter/systems/index.jsp?topic=/liaai/ipmi/liaaiipmitoolsol.htm&tocNode=toc%3Afront%2Ffront.cmb%2F0%2F2%2F7%2F5%2F6%2F2%2F and now, frankie - it is the machine, where I want do log on using SOL gw02 - its my machine [prze...@gw02 /etc]# ipmitool -I open -v -H 192.168.100.229 -U przemek chassis status Password: System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : always-off Last Power Event : Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Front Panel Control : none so I can check the status and now: [prze...@gw02 /etc]# ipmitool -I lanplus -v -H 192.168.100.229 -U przemek sol activate Password: > RAKP 2 HMAC is invalid Error: Unable to establish IPMI v2 / RMCP+ session Error: No response activating SOL payload and -vvv [prze...@gw02 /etc]# ipmitool -I lanplus -vvv -H 192.168.100.229 -U przemek sol activate Password: IPMI LAN host 192.168.100.229 port 623 >> Sending IPMI command payload >> netfn : 0x06 >> command : 0x38 >> data : 0x8e 0x04 BUILDING A v1.5 COMMAND >> IPMI Request Session Header >> Authtype : NONE >> Sequence : 0x00000000 >> Session ID : 0x00000000 >> IPMI Request Message Header >> Rs Addr : 20 >> NetFn : 06 >> Rs LUN : 0 >> Rq Addr : 81 >> Rq Seq : 00 >> Rq Lun : 0 >> Command : 38 << IPMI Response Session Header << Authtype : NONE << Payload type : IPMI (0) << Session ID : 0x00000000 << Sequence : 0x00000000 << IPMI Msg/Payload Length : 16 << IPMI Response Message Header << Rq Addr : 81 << NetFn : 07 << Rq LUN : 0 << Rs Addr : 20 << Rq Seq : 00 << Rs Lun : 0 << Command : 38 << Compl Code : 0x00 >> SENDING AN OPEN SESSION REQUEST <<OPEN SESSION RESPONSE << Message tag : 0x00 << RMCP+ status : no errors << Maximum privilege level : admin << Console Session ID : 0xa0a2a3a4 << BMC Session ID : 0x02000f00 << Negotiated authenticatin algorithm : hmac_sha1 << Negotiated integrity algorithm : hmac_sha1_96 << Negotiated encryption algorithm : aes_cbc_128 >> Console generated random number (16 bytes) 0d 94 78 94 03 d7 a3 24 8a 04 17 f7 df 86 e9 e7 >> SENDING A RAKP 1 MESSAGE <<RAKP 2 MESSAGE << Message tag : 0x00 << RMCP+ status : no errors << Console Session ID : 0xa0a2a3a4 << BMC random number : 0x0f4af584518c39fc5d9846289bd67fde << BMC GUID : 0xc0dd18d6027cb601319000215e4d39fc << Key exchange auth code [sha1] : 0xf58f28840586320b25daf0d188372a696a259394 bmc_rand (16 bytes) 0f 4a f5 84 51 8c 39 fc 5d 98 46 28 9b d6 7f de >> rakp2 mac input buffer (65 bytes) a4 a3 a2 a0 00 0f 00 02 0d 94 78 94 03 d7 a3 24 8a 04 17 f7 df 86 e9 e7 0f 4a f5 84 51 8c 39 fc 5d 98 46 28 9b d6 7f de c0 dd 18 d6 02 7c b6 01 31 90 00 21 5e 4d 39 fc 14 07 70 72 7a 65 6d 65 6b >> rakp2 mac key (20 bytes) 74 65 73 74 31 32 33 00 00 00 00 00 00 00 00 00 00 00 00 00 >> rakp2 mac as computed by the remote console (20 bytes) 82 1c f9 a8 ba 3d 39 c8 a5 f7 c9 3d 21 0d a2 9c f4 a0 13 60 > RAKP 2 HMAC is invalid Error: Unable to establish IPMI v2 / RMCP+ session Error: No response activating SOL payload [prze...@gw02 /etc]# where I made a bug? or where is the problem? BMC has the newest firmware. -- Z powazaniem Przemyslaw Backiel ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
