Hi All, I have been trying to monitor a chassis using the ipmievd tool. It logs the events in the syslog of the remote machine but I am unable to understand where these events originate (which board). Following is a snapshot of the messages that are logged:
ipmievd: System Firmware Progress sensor - Primary CPU initialization ipmievd: System Firmware Progress sensor - Management controller initialization ipmievd: System Boot Initiated sensor - Initiated by warm reset ipmievd: System Firmware Progress sensor - Option ROM initialization ipmievd: System Firmware Progress sensor - Option ROM initialization ipmievd: System Firmware Error sensor - Unrecoverable hard-disk controller failure ipmievd: System Firmware Progress sensor - System boot initiated Also I tried using -m ipmbadd -t slave_address but it gives the following error ipmievd -H ... -U ... -P ..... -m 0x20 -t 0x9a sel ipmievd: using pidfile /var/run/ipmievd.pid0 Error: Unable to establish LAN session Unable to open interface Could anyone please me any pointers on this ? Thanks in Advance, Amul
------------------------------------------------------------------------------
_______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
