> Hi All, > > I have been trying to monitor a chassis using the ipmievd tool. It logs the > events in the syslog of the remote machine but I am unable to understand > where these events originate (which board). Following is a snapshot of the > messages that are logged: > > ipmievd: System Firmware Progress sensor - Primary CPU initialization > ipmievd: System Firmware Progress sensor - Management controller > initialization > ipmievd: System Boot Initiated sensor - Initiated by warm reset > ipmievd: System Firmware Progress sensor - Option ROM initialization > ipmievd: System Firmware Progress sensor - Option ROM initialization > ipmievd: System Firmware Error sensor - Unrecoverable hard-disk controller > failure > ipmievd: System Firmware Progress sensor - System boot initiated > > Also I tried using -m ipmbadd -t slave_address but it gives the following > error > > > ipmievd -H ... -U ... -P ..... -m 0x20 -t 0x9a sel > ipmievd: using pidfile /var/run/ipmievd.pid0 > Error: Unable to establish LAN session > Unable to open interface > > > Could anyone please tell me whether something is wrong with my > understanding or if I am doing anything wrong ? > > > > > Thanks in Advance, > > Amul > > >
------------------------------------------------------------------------------
_______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
