Resend, I sent from the wrong account.
Well, this is certainly a gray area in the spec. The SDR in question is:
SDR
Record ID: 30
Type: 2
Version: 1.5
Data: 0x20 0x00 0x64 0x0a 0x00 0x67 0x40 0x25
0x08 0x03 0x00 0x00 0x00 0x03 0x00 0xc0
0x00 0x00 0x01 0x81 0x00 0x00 0x00 0x00
0x00 0x00 0xc9 0x50 0x53 0x30 0x2f 0x50
0x52 0x53 0x4e 0x54
Bytes 18 and 19 are the ones in question, these correspond to byte 24
and 25 of the "SDR type 02h Compact Sensor Record". Since the "share
count" is non-zero, OpenIPMI assumes that it is doing sensor sharing and
numbers them as specified in the spec and the other bits in those
bytes. Thus it appends the "1".
You can "fix" this problem by changing lib/sensor.c, line 1441 from:
if (share_count) {
to
if (share_count > 1) {
Any opinions on this from anyone else? IMHO, this is a poor design in
the spec, and it's silly for anyone to put a "1" in this share count field.
-corey
>
>
> Alex Deiter wrote:
>> Hi Corey,
>>
>> Also i uploaded output from command:
>>
>>
>>> mc sdrs test(0.20) main
>>>
>>
>> into http://deiter.net.ru/mc_sdr.txt
>>
>> Thanks a lot!
>>
>> 2010/5/28 Corey Minyard <cminy...@mvista.com>:
>>
>>> Can you do:
>>>
>>> mc sdrs test(0.20) main
>>>
>>> and send me the output?
>>>
>>> -corey
>>>
>>> Alex Deiter wrote:
>>>
>>>> Dear Corey,
>>>>
>>>> I found strange fact - on Sun x64 servers some sensors with discrete
>>>> type has incorrect names (it different then output from ILOM,
>>>> ipmitool, snmp etc).
>>>> Name for some (not all) *PRSNT sensors has suffix "1":
>>>>
>>>> $ openipmish
>>>>
>>>>
>>>>> domain open test lan -U root -P passwd -L user 10.1.1.1
>>>>>
>>>>>
>>>> ...
>>>> Event
>>>> Object Type: Sensor
>>>> ==> Name: test(10.0).PS0/PRSNT1
>>>> Operation: Add
>>>> ...
>>>>
>>>>
>>>>> sensor list
>>>>>
>>>>>
>>>> Entity
>>>> Name: test(10.0)
>>>> Sensors
>>>> Name: test(10.0).PS0/OUT_POWER
>>>> Name: test(10.0).PS0/IN_POWER
>>>> Name: test(10.0).PS0/I_OUT
>>>> Name: test(10.0).PS0/V_OUT
>>>> Name: test(10.0).PS0/I_IN
>>>> Name: test(10.0).PS0/V_IN
>>>> Name: test(10.0).PS0/TEMP_FAULT
>>>> Name: test(10.0).PS0/FAN_FAULT
>>>> Name: test(10.0).PS0/VOLT_FAULT
>>>> Name: test(10.0).PS0/CUR_FAULT
>>>> Name: test(10.0).PS0/PWROK
>>>> Name: test(10.0).PS0/VINOK
>>>> ==> Name: test(10.0).PS0/PRSNT1
>>>> Name: test(10.0).MB/V_+1V4
>>>> Name: test(10.0).MB/V_+3V3STBY
>>>> Name: test(10.0).MB/V_+5V
>>>> Name: test(10.0).MB/V_+3V3
>>>> Name: test(10.0).MB/V_+1V5
>>>>
>>>>
>>>>
>>>>> sensor info test(10.0).PS0/PRSNT1
>>>>>
>>>>>
>>>> Sensor
>>>> Name: test(10.0).PS0/PRSNT1
>>>> LUN: 0
>>>> Number: 100
>>>> Event Reading Type: 8
>>>> Event Reading Type Name: discrete_device_presense
>>>> Type: 37
>>>> Type Name: entity_presense
>>>> Event Support: per state
>>>> Init Scanning: true
>>>> Init Events: true
>>>> Init Thresholds: false
>>>> Init Hysteresis: false
>>>> Init Type: true
>>>> Init Power Up Events: true
>>>> Init Power Up Scanning: true
>>>> Ignore If No Entity: false
>>>> Auto Rearm: true
>>>> OEM1: 0
>>>> Id: PS0/PRSNT1
>>>> Event
>>>> Offset: 0
>>>> Name: device removed/absent
>>>> Supports: assertion
>>>> Event
>>>> Offset: 1
>>>> Name: device inserted/present
>>>> Supports: assertion
>>>>
>>>> output from ipmitool sensor list:
>>>> ...
>>>> PS0/PRSNT | 0x2 | discrete | 0x0200| na | na
>>>> | na | na | na | na
>>>> ...
>>>> output from ipmitool sensor get PS0/PRSNT:
>>>> Locating sensor record...
>>>> Sensor ID : PS0/PRSNT (0x64)
>>>> Entity ID : 10.0
>>>> Sensor Type (Discrete): Entity Presence
>>>> States Asserted : Availability State
>>>> [Device Present]
>>>>
>>>> output from ILOM:
>>>>
>>>> $ ssh r...@10.1.1.1
>>>> Password:
>>>>
>>>> Sun(TM) Integrated Lights Out Manager
>>>>
>>>> Version 3.0.6.16 r50656
>>>>
>>>> Copyright 2009 Sun Microsystems, Inc. All rights reserved.
>>>> Use is subject to license terms.
>>>>
>>>> -> show /SYS/PS0/PRSNT
>>>>
>>>> /SYS/PS0/PRSNT
>>>> Targets:
>>>>
>>>> Properties:
>>>> type = Entity Presence
>>>> ipmi_name = PS0/PRSNT
>>>> class = Discrete Sensor
>>>> value = Present
>>>> alarm_status = cleared
>>>>
>>>> snmp also show sensor names without suffix "1".
>>>>
>>>> Could you please explain this behavior for OpenIPMI ?
>>>>
>>>> Thanks a lot!
>>>>
>>>> --
>>>> Alex Deiter
>>>>
>>>>
>>>
>>
>>
>>
>>
>
------------------------------------------------------------------------------
_______________________________________________
Ipmitool-devel mailing list
Ipmitool-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
