On Wed, Dec 01, 2010 at 05:46:44AM -0800, Andy Cress wrote: > Ray, > > Also the Default Gateway MAC has not been resolved. > > Andy
Thanks Andy. I have another machine set up the same way (default MAC is empty) and everything works fine.... Ray > > -----Original Message----- > From: Ray Van Dolson [mailto:rvandol...@esri.com] > Sent: Tuesday, November 30, 2010 8:08 PM > To: ipmitool-devel@lists.sourceforge.net > Subject: [Ipmitool-devel] Configuring LAN -- Commit Write? > > Am trying to configure networking parameters on a SuperMicro-based > system running Solaris 10 U8 (Supermicro X8DT3 motherboard). > > ipmitools are the vendor provided SUNWipmi package which appears to be > v1.8.8. > > I've run the following: > > ipmitool lan set 1 ipaddr 192.168.6.18 > ipmitool lan set 1 netmask 255.255.0.0 > ipmitool lan set 1 defgw ipaddr 192.168.254.254 > ipmitool lan set 1 ipsrc static > ipmitool lan set 1 arp respond on > ipmitool lan set 1 arp generate on > ipmitool lan set 1 arp interval 5 > ipmitool lan set 1 access on > > But still cannot access the interface. ipmitool lan print 1 shows: > > # ipmitool lan print 1 > Set in Progress : Commit Write > Auth Type Support : MD2 MD5 OEM > Auth Type Enable : Callback : MD2 MD5 OEM > : User : MD2 MD5 OEM > : Operator : MD2 MD5 OEM > : Admin : MD2 MD5 OEM > IP Address Source : Static Address > IP Address : 192.168.6.18 > Subnet Mask : 255.255.0.0 > MAC Address : 00:30:48:f2:d3:ed > SNMP Community String : XXX > IP Header : TTL=0x00 Flags=0x00 Precedence=0x00 TOS=0x00 > BMC ARP Control : ARP Responses Enabled, Gratuitous ARP > Enabled > Gratituous ARP Intrvl : 5.0 seconds > Default Gateway IP : 192.168.254.254 > Default Gateway MAC : 00:00:00:00:00:00 > Backup Gateway IP : 0.0.0.0 > Backup Gateway MAC : 00:00:00:00:00:00 > 802.1q VLAN ID : Disabled > 802.1q VLAN Priority : 0 > RMCP+ Cipher Suites : 1,2,3,6,7,8,11,12,0 > Cipher Suite Priv Max : aaaaXXaaaXXaaXX > : X=Cipher Suite Unused > : c=CALLBACK > : u=USER > : o=OPERATOR > : a=ADMIN > : O=OEM > > I notice "Set in Progress" shows "Commit Write" instead of "Set > Complete" -- I imagine this is the reason. The settings haven't been > committed yet. > > Anyone know how to get things to "commit"? I've tried restarting the > IPMI service to no avail. > > Thanks, > Ray ------------------------------------------------------------------------------ Increase Visibility of Your 3D Game App & Earn a Chance To Win $500! Tap into the largest installed PC base & get more eyes on your game by optimizing for Intel(R) Graphics Technology. Get started today with the Intel(R) Software Partner Program. Five $500 cash prizes are up for grabs. http://p.sf.net/sfu/intelisp-dev2dev _______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
