I just bulit and installed the lastest cvs sources and got the same problem... I guess my BMC doesn't support 802.1q tagging :'(... It sucks.
Thanks anyway
alxgomz@moeszislak:~/ipmitool$ sudo /usr/local/bin/ipmitool -V
ipmitool version 1.8.11
alxgomz@moeszislak:~/ipmitool$ sudo /usr/local/bin/ipmitool -I open lan
print 1
Set in Progress : Set Complete
Auth Type Support : NONE MD5 PASSWORD
Auth Type Enable : Callback :
: User :
: Operator :
: Admin : NONE
: OEM :
IP Address Source : Static Address
IP Address : 217.112.53.228
Subnet Mask : 255.255.255.224
MAC Address : 00:15:17:5e:9f:be
SNMP Community String : public
IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10
BMC ARP Control : ARP Responses Disabled, Gratuitous ARP Enabled
Gratituous ARP Intrvl : 2.0 seconds
Default Gateway IP : 217.112.53.254
Default Gateway MAC : 00:00:00:00:00:00
Backup Gateway IP : 0.0.0.0
Backup Gateway MAC : 00:00:00:00:00:00
RMCP+ Cipher Suites : 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14
Cipher Suite Priv Max : XXXXXXXXXXXXXXX
: X=Cipher Suite Unused
: c=CALLBACK
: u=USER
: o=OPERATOR
: a=ADMIN
: O=OEM
sudo ipmitool -I open mc info
Device ID : 32
Device Revision : 1
Firmware Revision : 0.65
IPMI Version : 2.0
Manufacturer ID : 343
Manufacturer Name : Intel Corporation
Product ID : 43 (0x002b)
Product Name : Unknown (0x2B)
Device Available : yes
Provides Device SDRs : no
Additional Device Support :
Sensor Device
SDR Repository Device
SEL Device
FRU Inventory Device
IPMB Event Receiver
Chassis Device
Aux Firmware Rev Info :
0x00
0x43
0x00
0x03
Le mercredi 04 mai 2011 à 14:59 +0200, Alexandre Chapellon a écrit :
> I've done the same test as you and I have no ping loss, even after
> doing
>
> > ipmitool lan set 1 vlan id 100
>
> when tag is not confiured on the switch...
>
> I will try the lastest cvs.
> Just to give me a clue... does
>
> > ipmitool lan set 2 vlan id 42
>
> produce any output on your system?
>
> Regards.
>
> Le mercredi 04 mai 2011 à 14:37 +0200, Liebig, Holger a écrit :
> > Alex,
> > I don't know about your version of ipmitool, but the CVS version has
> > support for configuring and reading VLAN.
> >
> > A short inband test with
> >
> > ipmitool lan set 2 vlan id 42
> >
> > And
> >
> > ipmitool lan set 2 vlan id off
> >
> > Works as expected on my system (a permanent ping gets interrupted and comes
> > back)
> >
> > Holger
> >
> > >
> > > Hello,
> > >
> > > I am trying to configure ipmi lan acces on my server. It is shipped with
> > > the followin NIC:
> > > 05:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit
> > > Ethernet Controller (Copper) (rev 01)
> > > 05:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit
> > > Ethernet Controller (Copper) (rev 01)
> > >
> > > I have a dualport additionnal NIC:
> > > 03:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet
> > > Controller (rev 06)
> > > 03:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet
> > > Controller (rev 06)
> > >
> > > I can successfully get ipmi lan acces to work if I don't use 8021q tagged
> > > traffic but if i setup vlan tagging i have no more access to ipmi lan
> > > interface.
> > >
> > > I have tried to setup the BMC with ipmitools to match vlan setup but to no
> > > availE... here is the output of the command:
> > >
> > > alxgomz@moeszislak:~$ sudo ipmitool -I open lan set 1 vlan id 100
> > > alxgomz@moeszislak:~$ sudo ipmitool -I open lan print 1
> > > Set in Progress : Set Complete
> > > Auth Type Support : NONE MD5 PASSWORD
> > > Auth Type Enable : Callback :
> > > : User :
> > > : Operator :
> > > : Admin :
> > > : OEM :
> > > IP Address Source : Static Address
> > > IP Address : 217.112.53.228
> > > Subnet Mask : 255.255.255.224
> > > MAC Address : 00:15:17:5e:9f:be
> > > SNMP Community String : public
> > > IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10
> > > BMC ARP Control : ARP Responses Disabled, Gratuitous ARP Enabled
> > > Gratituous ARP Intrvl : 2.0 seconds
> > > Default Gateway IP : 217.112.53.254
> > > Default Gateway MAC : 00:00:00:00:00:00
> > > Backup Gateway IP : 0.0.0.0
> > > Backup Gateway MAC : 00:00:00:00:00:00
> > > RMCP+ Cipher Suites : 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14
> > > Cipher Suite Priv Max : XXXXXXXXXXXXXXX
> > > : X=Cipher Suite Unused
> > > : c=CALLBACK
> > > : u=USER
> > > : o=OPERATOR
> > > : a=ADMIN
> > > : O=OEM
> > >
> > > I can't find anything related alxgomz@moeszislak:~$ sudoto the VLAN ID...
> > > what does it mean? my nework cards do not supports Q tagging (which of
> > > course works with userspace tools in Linux)? Is there a way to enable this
> > > in BIOS (intel S5000VSA motherboard)?
> > >
> > > Thanks.
> > > --
> > > horoa: la voie est libre
>
> ------------------------------------------------------------------------------
> WhatsUp Gold - Download Free Network Management Software
> The most intuitive, comprehensive, and cost-effective network
> management toolset available today. Delivers lowest initial
> acquisition cost and overall TCO of any competing solution.
> http://p.sf.net/sfu/whatsupgold-sd
> _______________________________________________ Ipmitool-devel mailing list
> Ipmitool-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
--
horoa: la voie est libre
signature.asc
Description: This is a digitally signed message part
------------------------------------------------------------------------------ WhatsUp Gold - Download Free Network Management Software The most intuitive, comprehensive, and cost-effective network management toolset available today. Delivers lowest initial acquisition cost and overall TCO of any competing solution. http://p.sf.net/sfu/whatsupgold-sd
_______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
