On Fri, Sep 16, 2011 at 4:50 PM, Asif Iqbal <vad...@gmail.com> wrote:
> what are these "unspecified" means with "nc" and "cr" in `ipmitool
> sdr'. I am running
> ipmitool 1.8.11 on ubuntu lucid 64bit on SUN FIRE X4170 M2 SERVER.
Unspecified -> no unit of measure for the magnitude.
nc -> non-critical.
If the magnitude is 0, the sensor might not be fully implemented
in your vendor's BMC firmware. Try upgrading your firmware and see if
you can get support for the sensor from your vendor if you need it.
HTH,
-Garrett
------------------------------------------------------------------------------
BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA
http://p.sf.net/sfu/rim-devcon-copy2
_______________________________________________
Ipmitool-devel mailing list
Ipmitool-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
