Hi,
Having read the above draft, i reckon that it is a very simple and effective
mechanism for Prefix Delegation to implement.
Also, in addition why not carry out the following prefix allocation in the
diagram under Section 3.1.
1. Lb receives RA with prefix delegation option containing /56 prefix, e.g.
aaaa:bbbb:cccc:dd::/56
2. If a bit in the prefix delegation option format is not set(stateless=0,
stateful=1), then automatic assignment of /64 prefixes on Gx and Gy will be
Gx <= aaaa:bbbb:cccc:dd01::/64
Gy <= aaaa:bbbb:cccc:dd02::/64
.
.
Gn <= aaaa:bbbb:cccc:ddff::/64
or depending on the site's requirements
Lb <= /56 prefix
Gx <= /58 prefix
Gy <= /58 prefix
and the length of the prefix to be allocated on the site link can be specified
in the prefix delegation option format as well.
Regards,
Sean
-------------------------------------------------------------
Sean Lin 27 Nazareth Avenue
Software Engineer PO Box 8011
Allied Telesyn Research Christchurch
phone +64 3 339 3000 New Zealand
fax +64 3 339 3002 email: [EMAIL PROTECTED]
web: http://www.alliedtelesyn.co.nz/
-------------------------------------------------------------
--------------------------------------------------------------------
IETF IPng Working Group Mailing List
IPng Home Page: http://playground.sun.com/ipng
FTP archive: ftp://playground.sun.com/pub/ipng
Direct all administrative requests to [EMAIL PROTECTED]
--------------------------------------------------------------------
