[IPsec] RFC5996bis editorial change in section 2.16 Extensible Authentication Protocol Methods (Was Editorial changes to RFC5996)

[Tero Kivinen]

Valery Smyslov writes:
> 10. Page 51.
>     "As described in Section 2.2, when EAP is used, each pair of IKE SA
>    initial setup messages will have their message numbers incremented;
>    the first pair of AUTH messages will have an ID of 1, the second will
>    be 2, and so on."
> 
> Should be:
> 
>     "As described in Section 2.2, when EAP is used, each pair of IKE SA
>    initial setup messages will have their message numbers incremented;
>    the first pair of IKE_AUTH messages will have an ID of 1, the second will
>    be 2, and so on."

Changed:

        <t>As described in <xref target='sect-2.2'/>, when EAP is
        used, each pair of IKE SA initial setup messages will have
        their message numbers incremented; the first pair of AUTH
        messages will have an ID of 1, the second will be 2, and so
        on.</t>

To:

        <t>As described in <xref target='sect-2.2'/>, when EAP is
        used, each pair of IKE SA initial setup messages will have
        their message numbers incremented; the first pair of IKE_AUTH
        messages will have an ID of 1, the second will be 2, and so
        on.</t>
-- 
kivi...@iki.fi
_______________________________________________
IPsec mailing list
IPsec@ietf.org
https://www.ietf.org/mailman/listinfo/ipsec