On Sep 15, 2010, at 7:19 AM, Fred Baker wrote:

> So that might use the mesh network header part of the 6lowpan header?

We would need be using the compressed ID header

> 
> On Sep 15, 2010, at 12:06 AM, Carsten Bormann wrote:
> 
>>> Has anybody discussed adding a header with just the 3 bytes you need 
>>> *before* the IP header?
>> 
>> Yes.  Ever since you proposed pretty much that at a previous IETF meeting, 
>> I've been thinking that architecturally it makes a lot of sense to think 
>> about ROLL as a sub-IP protocol.
>> 
>>> The downside is that you need a new code point (for demux) in the different 
>>> layer2s that you want to run this on.
>> 
>> And that is exactly the non-starter about the general proposal.
>> It is not acceptable to require a new spec for each of the many link layers 
>> we want to run ROLL on, in particular for those who don't really care that 
>> much about the overhead.
>> 
>> However, it would be pretty easy to put something in 6lowpan to carry those 
>> 3 bytes.
>> (Consider it an advanced form of header compression for the 48-byte IP-in-IP 
>> thing, if you don't like the sub-IP thinking.)
>> Consult http://tools.ietf.org/html/draft-bormann-6lowpan-ext-hdr-00 for a 
>> sample base design.
>> Such a simple extension may actually be a preferable way to carry ROLL in 
>> 6lowpan.
>> 
>> Gruesse, Carsten
>> 
>> --------------------------------------------------------------------
>> IETF IPv6 working group mailing list
>> [email protected]
>> Administrative Requests: https://www.ietf.org/mailman/listinfo/ipv6
>> --------------------------------------------------------------------
> 
> --------------------------------------------------------------------
> IETF IPv6 working group mailing list
> [email protected]
> Administrative Requests: https://www.ietf.org/mailman/listinfo/ipv6
> --------------------------------------------------------------------

--------------------------------------------------------------------
IETF IPv6 working group mailing list
[email protected]
Administrative Requests: https://www.ietf.org/mailman/listinfo/ipv6
--------------------------------------------------------------------

Reply via email to