On Tuesday 08 Nov 2011 16:55:00 Yixuan Huang wrote: > Sorry, I am not catching your mean. Here I have no DHCP server, and my > client which I want to boot from gpxe cannot get any ip address, so how can > I set my client, then connect remote server which store kernel. Does there > has a command or in script I can type ip address for that client, like > ifconfig under unix/linux. After I config ip, then I can connect server and > get anything I want.
You need to use the "set" command: http://ipxe.org/cmd/set This will allow you to configure an IP address without using DHCP. You will also need to open the network interface using the "ifopen" command: http://ipxe.org/cmd/ifopen and download and boot something using the "chain" command: http://ipxe.org/cmd/chain Once you've worked out the commands that you need, you can create an iPXE embedded script; see http://ipxe.org/scripting Note that most of these features are not supported by gPXE (which is a dead project); the first thing that you should do is upgrade to iPXE. Michael _______________________________________________ ipxe-devel mailing list [email protected] https://lists.ipxe.org/mailman/listinfo/ipxe-devel
