Hello Guys, I am facing a new issue. I want to post new message. However, just record here either. ipxe seems has no driver for broadcom (14e4:163a), which should be bcm5709s series. I tested it on IBM HS22V.
I used gpxe, it can show that interface. Thanks, yixuan On Wed, Nov 9, 2011 at 11:12 PM, Michael Brown <[email protected]>wrote: > On Tuesday 08 Nov 2011 16:55:00 Yixuan Huang wrote: > > Sorry, I am not catching your mean. Here I have no DHCP server, and my > > client which I want to boot from gpxe cannot get any ip address, so how > can > > I set my client, then connect remote server which store kernel. Does > there > > has a command or in script I can type ip address for that client, like > > ifconfig under unix/linux. After I config ip, then I can connect server > and > > get anything I want. > > You need to use the "set" command: > > http://ipxe.org/cmd/set > > This will allow you to configure an IP address without using DHCP. You > will > also need to open the network interface using the "ifopen" command: > > http://ipxe.org/cmd/ifopen > > and download and boot something using the "chain" command: > > http://ipxe.org/cmd/chain > > Once you've worked out the commands that you need, you can create an iPXE > embedded script; see > > http://ipxe.org/scripting > > Note that most of these features are not supported by gPXE (which is a dead > project); the first thing that you should do is upgrade to iPXE. > > Michael >
_______________________________________________ ipxe-devel mailing list [email protected] https://lists.ipxe.org/mailman/listinfo/ipxe-devel
