Hi,
Got some new hardware today: asus p10s-m motherboard.
https://www.asus.com/Commercial-Servers-Workstations/P10S-M/
It seems to have intel NICs, and legacy CSM mode. UEFI pxe booting works
OK. However UEFI does not work chaining into boot.salstar.sk, with some
message about bad or incorrect executable format.
As for legacy BIOS mode, here is the output where it fails:
Intel(R) Boot Agent GE v1.5.72
Copyright (C) 1997-2014, Intel Corporation
CLIENT MAC ADDR: 34 97 F6 5A FE E8 GUID: 2098D402 E642 9B81 83D0
3497F65AFEE7
CLIENT IP: 192.168.1.221 MASK: 255.255.0.0
DHCP IP: 192.168.1.1 PROXY IP: 192.168.69.69
GATEWAY IP: 192.168.1.1
Auto-select:
PC-DOS: Chainload Boot - iPXE
BOOT SERVER IP: 192.168.69.69
PXE->EB: !PXE at 97B4:0070, entry point at 97B4:0106
UNDI code segment 7EB4:5F30, data segment 787C:6380 (481-531kB)
UNDI device is PCI 04:00.0, type DIX+802.3
531kB free base memory after PXE unload
iPXE initialising devices...ok
iPXE 1.0.0+ (2afd6) -- Open Source Network Boot Firmware -- http://ipxe.org
Features: DNS HTTP iSCSI TFTP AoE ELF MBOOT PXE bzImage Menu PXEXT
net0: 34:97:f6:5a:fe:e8 using undionly on UNI-PCI04:00.0 (open)
[Link:up, TX:0 TXE:1 RX:0 RXE:0]
[TXE: 1 x "Network unreachable (http://ipxe.org/28086011";]
Configuring (net0 34:97:f6:5a:fe:e8).................... No configuration
methods succeeded (http://ipxe.org/040ee119)
Press Ctrl+B for iPXE cmdline
Not seem to matter at all whether have plugged into NIC 1 or NIC 2, it
always reports the same thing about 'net0', and with same error message.
Any help appreciated.
_______________________________________________
ipxe-devel mailing list
ipxe-devel@lists.ipxe.org
https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
