Updated undionly.kpxe to 827dd to the latest version, (aug 30th). Unfortunately its still the same error message.
On Fri, Sep 23, 2016 at 4:10 PM, Dreamcat4 <dreamc...@gmail.com> wrote: > Hi, > Got some new hardware today: asus p10s-m motherboard. > > https://www.asus.com/Commercial-Servers-Workstations/P10S-M/ > > > It seems to have intel NICs, and legacy CSM mode. UEFI pxe booting works > OK. However UEFI does not work chaining into boot.salstar.sk, with some > message about bad or incorrect executable format. > > > > As for legacy BIOS mode, here is the output where it fails: > > Intel(R) Boot Agent GE v1.5.72 > Copyright (C) 1997-2014, Intel Corporation > > CLIENT MAC ADDR: 34 97 F6 5A FE E8 GUID: 2098D402 E642 9B81 83D0 > 3497F65AFEE7 > CLIENT IP: 192.168.1.221 MASK: 255.255.0.0 > DHCP IP: 192.168.1.1 PROXY IP: 192.168.69.69 > GATEWAY IP: 192.168.1.1 > > Auto-select: > PC-DOS: Chainload Boot - iPXE > > BOOT SERVER IP: 192.168.69.69 > > PXE->EB: !PXE at 97B4:0070, entry point at 97B4:0106 > UNDI code segment 7EB4:5F30, data segment 787C:6380 (481-531kB) > UNDI device is PCI 04:00.0, type DIX+802.3 > 531kB free base memory after PXE unload > iPXE initialising devices...ok > > > > iPXE 1.0.0+ (2afd6) -- Open Source Network Boot Firmware -- > http://ipxe.org > Features: DNS HTTP iSCSI TFTP AoE ELF MBOOT PXE bzImage Menu PXEXT > > net0: 34:97:f6:5a:fe:e8 using undionly on UNI-PCI04:00.0 (open) > [Link:up, TX:0 TXE:1 RX:0 RXE:0] > [TXE: 1 x "Network unreachable (http://ipxe.org/28086011";] > Configuring (net0 34:97:f6:5a:fe:e8).................... No configuration > methods succeeded (http://ipxe.org/040ee119) > > Press Ctrl+B for iPXE cmdline > > > > Not seem to matter at all whether have plugged into NIC 1 or NIC 2, it > always reports the same thing about 'net0', and with same error message. > Any help appreciated. > > > > >
_______________________________________________ ipxe-devel mailing list ipxe-devel@lists.ipxe.org https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
