Hello everyone, We've seem to have hit the same issue already reported in the past ( https://ipxe-devel.ipxe.narkive.com/yvFmyDlQ/nic-drivers) but either it was never resolved or it's just a different permutation.
Here are the details: *NIC Adapter:* HP FlexFabric 20Gb 2-port 650FLB Adapter, which is based on the Emulex XE-104 processor (https://h20195.www2.hpe.com/V2/GetPDF.aspx/c04347341.pdf), the NIC is configured in a FlexNIC configuration. *NIC Firmware: *12.0.1216.0 (latest available) We used the latest ipxe.efi (*3fe683eb*) which failed, following the instructions in the mentioned thread we've built the same with *DEBUG=nii:3* and got the same outputs as in the linked thread: *ifstat* iPXE> ifstat net0: b8:83:03:f6:ba:90 using NII on NII-0000:37:00.0 (closed) [Link:down. TX:0 TXE:0 RX:0 RXE:0] [Link status: Unknown (http://ipxe.org/1a086194)] net1: b8:83:03:f6:ba:98 using NII on NII-0000:37:00.1 (closed) [Link:down. TX:0 TXE:0 RX:0 RXE:0] [Link status: Unknown (http://ipxe.org/1a086194)] net2: b8:83:03:f6:ba:91 using NII on NII-0000:37:00.2 (closed) [Link:down. TX:0 TXE:0 RX:0 RXE:0] [Link status: Unknown (http://ipxe.org/1a086194)] net3: b8:83:03:f6:ba:99 using NII on NII-0000:37:00.3 (closed) [Link:down. TX:0 TXE:0 RX:0 RXE:0] [Link status: Unknown (http://ipxe.org/1a086194)] iPXE> *ifopen net0 (same for the other 3)* iPXE> ifopen net0 NII NII-0000:37:00.0 issuing 05:0001 ifnum 0 cpb db 7a2e67c6 : ff ff ff ff ff ff ff ff-00 00 00 00 00 00 00 00 : 7a2e67d6 : 00 00 00 00 00 00 00 00-00 00 7a2e67ba : 00 00 00 00 00 00 00 00-00 00 00 00 NII NII-0000:37:00.0 could not set station address: Operation not supported (http://ipde.org/3c6a4083) NII NII-0000:37:00.0 issuing 09:801b ifnum 0 NII NII-0000:37:00.0 could not set receive filters 0x801b: Input/output error (http://ipxe.org/1d6a4a98) NII NII-0000:37:00.0 issuing 07:0000 ifnum 0 Could not open net0: Input/output error (http://iime.org/1d6a4a90) iPXE> We've built the ipxe.efi using the commit that was mentioned (*5cf5ffea*) and that works just fine. We can provide any additional output/test as needed. Regards, Danny
_______________________________________________ ipxe-devel mailing list ipxe-devel@lists.ipxe.org https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel