On Fri, Oct 11, 2019 at 09:16:33AM -0400, Danny Kulchinsky wrote: > Hello everyone, > > We've seem to have hit the same issue already reported in the past ( > https://ipxe-devel.ipxe.narkive.com/yvFmyDlQ/nic-drivers) but either it was > never resolved or it's just a different permutation. > > Here are the details: > > *NIC Adapter:* > HP FlexFabric 20Gb 2-port 650FLB Adapter, which is based on the Emulex > XE-104 processor (https://h20195.www2.hpe.com/V2/GetPDF.aspx/c04347341.pdf), > the NIC is configured in a FlexNIC configuration. > *NIC Firmware: *12.0.1216.0 (latest available) > > We used the latest ipxe.efi (*3fe683eb*) which failed, following the
https://git.ipxe.org/ipxe.git/commit/3fe683eb (Sun, 29 Sep 2019 21:59:22 +0200 (20:59 +0100)) > instructions in the mentioned thread we've built the same with *DEBUG=nii:3* > and got the same outputs as in the linked thread: > > *ifstat* > > iPXE> ifstat > net0: b8:83:03:f6:ba:90 using NII on NII-0000:37:00.0 (closed) > [Link:down. TX:0 TXE:0 RX:0 RXE:0] > [Link status: Unknown (http://ipxe.org/1a086194)] > net1: b8:83:03:f6:ba:98 using NII on NII-0000:37:00.1 (closed) > [Link:down. TX:0 TXE:0 RX:0 RXE:0] > [Link status: Unknown (http://ipxe.org/1a086194)] > net2: b8:83:03:f6:ba:91 using NII on NII-0000:37:00.2 (closed) > [Link:down. TX:0 TXE:0 RX:0 RXE:0] > [Link status: Unknown (http://ipxe.org/1a086194)] > net3: b8:83:03:f6:ba:99 using NII on NII-0000:37:00.3 (closed) > [Link:down. TX:0 TXE:0 RX:0 RXE:0] > [Link status: Unknown (http://ipxe.org/1a086194)] > iPXE> > > > *ifopen net0 (same for the other 3)* > > iPXE> ifopen net0 > NII NII-0000:37:00.0 issuing 05:0001 ifnum 0 cpb db > 7a2e67c6 : ff ff ff ff ff ff ff ff-00 00 00 00 00 00 00 00 : > 7a2e67d6 : 00 00 00 00 00 00 00 00-00 00 > 7a2e67ba : 00 00 00 00 00 00 00 00-00 00 00 00 > NII NII-0000:37:00.0 could not set station address: Operation not supported > (http://ipde.org/3c6a4083) > NII NII-0000:37:00.0 issuing 09:801b ifnum 0 > NII NII-0000:37:00.0 could not set receive filters 0x801b: Input/output error > (http://ipxe.org/1d6a4a98) > NII NII-0000:37:00.0 issuing 07:0000 ifnum 0 > Could not open net0: Input/output error (http://iime.org/1d6a4a90) > iPXE> > > > We've built the ipxe.efi using the commit that was mentioned (*5cf5ffea*) https://git.ipxe.org/ipxe.git/commit/5cf5ffea (Wed, 7 Dec 2016 15:46:37 +0200 (13:46 +0000)) > and that works just fine. > > We can provide any additional output/test as needed. git-bisect - Use binary search to find the commit that introduced a bug Groeten Geert Stappers -- Leven en laten leven _______________________________________________ ipxe-devel mailing list ipxe-devel@lists.ipxe.org https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel