On Thu, Jan 19, 2023 at 04:49:09PM +0000, Thomas Walker via ipxe-devel wrote: > ... happy ... But I'm encontering 2 problems (on master from > a couple of weeks back, 7147532c): > > The 1G LOM is a Broadcom 5720, nearly identical to the previous > generation server that works fine. Both good and bad are vendor:dev > 14e4:165f and subvendor 1028. The older (working) system has a > subdevice of 08ff whereas the newer (sort of working) one has a > subdevice of 0a6b. > > While ipxe does appear to "work" with this adapter, it prints: > > WARNING: Using legacy NIC wrapper on 79:79:79:79:79:79 > > Where that MAC obviously bears no relation > to the actual MAC on the device. > > This system also has an OCP slot fitted with a Broadcom 57414 > (vendor:device 14e4:16d7 and subvendor:subdevice 1407:4145) and manages > to dhcp but not much more. Enabling debugging (DEBUG=bnxt:2) shows > that, when "Configuring", it starts spewing: > > assert(!iob) failed at drivers/net/bnxt/bnxt.c line 468 > > over and over until it finally fails and ipxe exits. In fact, I had > to compile bnxt out completely in order to boot the system > off of the 1G LOM. > > Any suggestions for either of these?
Share with us which compiler is being used. Share with us which compilers have been used. Groeten Geert Stappers -- Silence is hard to parse _______________________________________________ ipxe-devel mailing list ipxe-devel@lists.ipxe.org https://lists.ipxe.org/mailman/listinfo/ipxe-devel
