Hi,
What output to expect from ipxe.lkrn ( downloaded from https://boot.ipxe.org ) when started from grub? Longer version: My attempts did bring me a black screen and a reboot. Computer, when booted into Linux, reports 'x86_64' as output of `uname -m`. The uEFI system boots fine with grub as bootloader. Booting from other media implies going through several hoops, hence the desire to start iPXE with grub. With https://boot.ipxe.org/ipxe.usb on an USBstick (and going through the hoops of "BIOS Setup") do I get output. But no network device is found. That is because the laptop has no ethernet device, its USB-C-docking-station does have an ethernet connection. GRUB does show iPXE as a menuentry due `sudo apt install ipxe`. The `/boot/ipxe.lkrn` from the Debian package is overwritten by the one from https://boot.ipxe.org/ Selecting the menuentry makes the grub graphics disappear and screen going black. A few moments later appears the splash screen of the bootROM, simular as upon `reboot`. The few moments are way shorter as typical DHCP request done by iPXE. So I could like to known if there should be output from ipxe.lkrn. Groeten Geert Stappers -- Silence is hard to parse _______________________________________________ ipxe-devel mailing list ipxe-devel@lists.ipxe.org https://lists.ipxe.org/mailman/listinfo/ipxe-devel
