Hi Bill, I don't own a SDR-IQ, but I know that the author of SpectraVue makes a file editing utility available. Check out this link for "WaveVue":
http://www.moetronix.com/svdownload.htm 73, Guy Atkins Puyallup, WA USA www.perseus-sdr.blogspot.com ------------------------------------------------- > Date: Sat, 29 Nov 2008 08:38:36 -0500 > From: Bill Harms <[EMAIL PROTECTED]> > Subject: [IRCA] Splicing files! > > I know this may sound crazy, but I decided to try to splice files > together assuming they have the same center frequency and the same > bandwidth. I recorded several files that met the above criteria and > spliced them with GoldWave, and it worked fine, with just a couple of > hitches. I wanted to do this because I these files were "next" to each > other in time. I had a problem with Spectravue cutting off in the middle > of recording (that is another issue), and I had to restart them. As long > as the restart interval is not too much, it doesn't really matter > significantly. > > Anyway, the audio of the original recordings were still intact on the > spliced file. You can still scan through the file as normal. However, > the spliced file lost some of "Aux information" like the center > frequency and the original time stamp. Also, I don't know why but the > spliced file was a little bit wider than the original recordings > (originals - 150 kHz and spliced - 158.727 kHz.) For the center > frequency, if you enter the correct center frequency when you load the > spliced file and it works just fine. I don't know how to fix the time > stamp, so you have to live with the new one. > > So, if you ever have a reason to splice files together, it is possible. > > Now back to DXing. > > Bill Harms > Elkridge, Maryland > > _______________________________________________ IRCA mailing list IRCA@hard-core-dx.com http://montreal.kotalampi.com/mailman/listinfo/irca Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers For more information: http://www.ircaonline.org To Post a message: irca@hard-core-dx.com