September 12, 2011 Not sure this is the right forum for an antenna question.
If not, please direct me to the right one. I am thinking of re-doing my lead in
coax for my 400 foot longwire. Instead of taking it right into the radio as I
have done in the last few years, I am thinking of putting in a two way SO-239
female connector in the bottom of the window frame so I can run a coax from the
wire the "outside" of the SO-239, then a coax from the "inside" part of the
SO-239 to the radio. Last year, the "hole" I ran the coax through the window
got leaky on cold winter nights and this two way SO-239 solves that. Question:
What is the best coax to run about 100 feet from my longwire to the outside
SO-239 and does the inside coax from the interior SO-239 need to be the same
type of wire or is there an impedance mismatch if I used a different coax wire?
I think I used RG-58/U, because I had it laying around. Or does it not matter?
Thanks. George A. SantulliLovettsville, VA
_______________________________________________
IRCA mailing list
[email protected]
http://montreal.kotalampi.com/mailman/listinfo/irca
Opinions expressed in messages on this mailing list are those of the original
contributors and do not necessarily reflect the opinion of the IRCA, its
editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: [email protected]
