Same problem here...
I grabbed ruby from here:
http://rubyosx.rubyforge.org/
I got the 1.9 mono dist from mono-project.org
I installed the missing gem module:
$ sudo gem install -b pathname
then tried to build:
[EMAIL PROTECTED]:/usr/src/svn/rubyforge.org/ironruby/trunk$ mono=1 rake --
trace compile
(in /usr/src/svn/rubyforge.org/ironruby/trunk)
** Invoke compile (first_time)
** Invoke happy (first_time)
** Execute happy
** Invoke clean_build (first_time)
** Invoke happy
** Execute clean_build
** Invoke compile_dlr (first_time)
** Invoke clean_build
** Execute compile_dlr
rake aborted!
cannot resolve path System.dll
./context.rb:90:in `resolve_framework_path'
./context.rb:89:in `each'
./context.rb:89:in `resolve_framework_path'
./context.rb:130:in `resolve_framework_path'
./context.rb:405:in `resolve_framework_path'
./context.rb:420:in `references'
./context.rb:418:in `each'
./context.rb:418:in `references'
./context.rb:434:in `compile'
./context.rb:432:in `chdir'
./context.rb:432:in `compile'
/usr/src/svn/rubyforge.org/ironruby/trunk/rakefile:137
./context.rb:578:in `instance_eval'
./context.rb:578:in `source_context'
/usr/src/svn/rubyforge.org/ironruby/trunk/rakefile:135
/usr/local/lib/ruby/gems/1.8/gems/rake-0.7.3/lib/rake.rb:392:in `call'
/usr/local/lib/ruby/gems/1.8/gems/rake-0.7.3/lib/rake.rb:392:in
`execute'
/usr/local/lib/ruby/gems/1.8/gems/rake-0.7.3/lib/rake.rb:392:in `each'
/usr/local/lib/ruby/gems/1.8/gems/rake-0.7.3/lib/rake.rb:392:in
`execute'
/usr/local/lib/ruby/gems/1.8/gems/rake-0.7.3/lib/rake.rb:362:in `invoke'
/usr/local/lib/ruby/gems/1.8/gems/rake-0.7.3/lib/rake.rb:355:in
`synchronize'
/usr/local/lib/ruby/gems/1.8/gems/rake-0.7.3/lib/rake.rb:355:in `invoke'
/usr/local/lib/ruby/gems/1.8/gems/rake-0.7.3/lib/rake.rb:369:in
`invoke_prerequisites'
/usr/local/lib/ruby/gems/1.8/gems/rake-0.7.3/lib/rake.rb:1003:in `each'
/usr/local/lib/ruby/gems/1.8/gems/rake-0.7.3/lib/rake.rb:1003:in `send'
/usr/local/lib/ruby/gems/1.8/gems/rake-0.7.3/lib/rake.rb:1003:in `each'
/usr/local/lib/ruby/gems/1.8/gems/rake-0.7.3/lib/rake.rb:368:in
`invoke_prerequisites'
/usr/local/lib/ruby/gems/1.8/gems/rake-0.7.3/lib/rake.rb:361:in `invoke'
/usr/local/lib/ruby/gems/1.8/gems/rake-0.7.3/lib/rake.rb:355:in
`synchronize'
/usr/local/lib/ruby/gems/1.8/gems/rake-0.7.3/lib/rake.rb:355:in `invoke'
/usr/local/lib/ruby/gems/1.8/gems/rake-0.7.3/lib/rake.rb:1739:in
`top_level'
/usr/local/lib/ruby/gems/1.8/gems/rake-0.7.3/lib/rake.rb:1739:in `each'
/usr/local/lib/ruby/gems/1.8/gems/rake-0.7.3/lib/rake.rb:1739:in
`top_level'
/usr/local/lib/ruby/gems/1.8/gems/rake-0.7.3/lib/rake.rb:1761:in
`standard_exception_handling'
/usr/local/lib/ruby/gems/1.8/gems/rake-0.7.3/lib/rake.rb:1733:in
`top_level'
/usr/local/lib/ruby/gems/1.8/gems/rake-0.7.3/lib/rake.rb:1711:in `run'
/usr/local/lib/ruby/gems/1.8/gems/rake-0.7.3/lib/rake.rb:1761:in
`standard_exception_handling'
/usr/local/lib/ruby/gems/1.8/gems/rake-0.7.3/lib/rake.rb:1708:in `run'
/usr/local/lib/ruby/gems/1.8/gems/rake-0.7.3/bin/rake:7
/usr/local/bin/rake:16:in `load'
/usr/local/bin/rake:16
[EMAIL PROTECTED]:/usr/src/svn/rubyforge.org/ironruby/trunk$ MONO_PATH=
$MONO_PATH:/Library/Frameworks/Mono.framework/Versions/1.9/lib/mono/
2.1/ mono=1 rake compile(in /usr/src/svn/rubyforge.org/ironruby/trunk)
rake aborted!
cannot resolve path System.dll
/usr/src/svn/rubyforge.org/ironruby/trunk/rakefile:137
(See full trace by running task with --trace)
On May 9, 2008, at 6:22 AM, C.J. Adams-Collier wrote:
I usually put mono=1 before the call to rake, but I haven't tried
building on my darwin box yet... I'll try it now and see what
happens...
On May 9, 2008, at 5:30 AM, Robert Bazinet wrote:
Yeah, that was that error. I was reading it as not needing a gem
but the gem reporting an error in the path.
I am now getting an error where it can find system.dll. I saw
some postings on here about that and pkg-config. I installed Mono
from the OSX package installer. I would expect these things to be
set correctly. Is this a wrong assumption? Should I have
installed from source instead?
What is the correct setting if using the Mono package installer?
Thanks,
Rob
On Thu, May 8, 2008 at 11:26 PM, Ivan Porto Carrero
<[EMAIL PROTECTED]> wrote:
ok looks like you need the gem pathname2
sudo gem install pathname2 (might be pathname my memory fails me)
On 9/05/2008, at 3:20 PM, Robert Bazinet wrote:
Ivan, I wanted to see if you were paying attention..yes, what I
sent over shows the command from the WRONG directory. I was in
that directory and just used the command history to run the
command so I could send it over to the group. The command is
failing and I am sending the right one now. You can see I am
not nuts, just copying and pasting the wrong info.
So, here it is:
rbazinet: ~/ironruby$ rake compile mono=1
(in /Users/rbazinet/ironruby)
rake aborted!
Could not find RubyGem pathname2 (>= 0)
/Users/rbazinet/ironruby/rakefile:5
(See full trace by running task with --trace)
rbazinet: ~/ironruby$ rake --trace compile mono=1
(in /Users/rbazinet/ironruby)
rake aborted!
Could not find RubyGem pathname2 (>= 0)
/Library/Ruby/Site/1.8/rubygems.rb:523:in `report_activate_error'
/Library/Ruby/Site/1.8/rubygems.rb:131:in `activate'
/Library/Ruby/Site/1.8/rubygems.rb:49:in `gem'
/Users/rbazinet/ironruby/rakefile:5
/Library/Ruby/Gems/1.8/gems/rake-0.8.1/lib/rake.rb:2149:in `load'
/Library/Ruby/Gems/1.8/gems/rake-0.8.1/lib/rake.rb:2149:in
`raw_load_rakefile'
/Library/Ruby/Gems/1.8/gems/rake-0.8.1/lib/rake.rb:1897:in
`load_rakefile'
/Library/Ruby/Gems/1.8/gems/rake-0.8.1/lib/rake.rb:1948:in
`standard_exception_handling'
/Library/Ruby/Gems/1.8/gems/rake-0.8.1/lib/rake.rb:1896:in
`load_rakefile'
/Library/Ruby/Gems/1.8/gems/rake-0.8.1/lib/rake.rb:1880:in `run'
/Library/Ruby/Gems/1.8/gems/rake-0.8.1/lib/rake.rb:1948:in
`standard_exception_handling'
/Library/Ruby/Gems/1.8/gems/rake-0.8.1/lib/rake.rb:1878:in `run'
/Library/Ruby/Gems/1.8/gems/rake-0.8.1/bin/rake:31
/usr/bin/rake:19:in `load'
/usr/bin/rake:19
Does this make more sense??
Thanks,
Rob
On Thu, May 8, 2008 at 11:06 PM, Ivan Porto Carrero
<[EMAIL PROTECTED]> wrote:
This happens to me sometimes but isn't related to ironruby in my
case.
if you do ls Rake* does something show up? Rake is complaining
about the fact that it can't find its instruction set (Rakefile).
From the output I see, it doesn't even start to build
I merely suggested navigating to the folder because of he prompt
I see
rbazinet:~$ which would indicate you tried to run the rake
command in your home drive instead of in
rbazinet:~/ironruby $
But of course I'm making the assumption that your prompt
indicates in which folder you are.
_______________________________________________
Ironruby-core mailing list
[email protected]
http://rubyforge.org/mailman/listinfo/ironruby-core
--
Rob Bazinet
InfoQ Ruby and .NET Editor
http://www.accidentaltechnologist.com
_______________________________________________
Ironruby-core mailing list
[email protected]
http://rubyforge.org/mailman/listinfo/ironruby-core
_______________________________________________
Ironruby-core mailing list
[email protected]
http://rubyforge.org/mailman/listinfo/ironruby-core
--
Rob Bazinet
InfoQ Ruby and .NET Editor
http://www.accidentaltechnologist.com
_______________________________________________
Ironruby-core mailing list
[email protected]
http://rubyforge.org/mailman/listinfo/ironruby-core
_______________________________________________
Ironruby-core mailing list
[email protected]
http://rubyforge.org/mailman/listinfo/ironruby-core
_______________________________________________
Ironruby-core mailing list
[email protected]
http://rubyforge.org/mailman/listinfo/ironruby-core
