TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any problems!
----------------------------------------------------------------------------
In a switched environment the switch only sends traffic down a segment if
the destination is on that segment rather than having all nodes read the
packet to see if the packet is destined for that node.
If you are on a switched environment the detector will not see the desired
traffic pure and simple.
The solution is to have the switch (or router) mirror all traffic from one
port to the port where the detector is plugged into. (If the detector sees
all packets on the inside interface of the firewall then it can detect on
all traffic coming into or exiting through that firewall.)
Switched environment increases your effective bandwidth by minimizing
collisions on any one segment.
RP
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Friday, April 21, 2000 4:29 PM
To: [EMAIL PROTECTED]
Subject: Mirroring Ports for RealSecure
TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any
problems!
----------------------------------------------------------------------------
We have two firewalls (firewall A and firewall B)on two separate swithched
segments. We also run our web servers on a swithched segment, with the
RealSecure box sitting behind firewall A. I read somewhere about enabling
port mirroring on the firewall so the IDS can pick up the scans. I wasn't
too sure what this meant. Can anyone clarify what port mirroring is and why
the IDS needs to be configured this way to work?
Thanks,
Mark