TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED]  Contact [EMAIL PROTECTED] for help with any problems!
----------------------------------------------------------------------------

Mark,

Port mirroring is a function of the Ethernet switch and not the firewall.
You will need to see if your switch supports this feature, not all them do.
I have used this technique to monitor multiple segments (or in my case
VLANS) with a single NIC on my RealSecure engine.  I am not totally sold on
this idea as it seems to introduce some peculiarities on the "source"
address of events in Real Secure.  I probably just need to play with it some
more.

In this approach, traffic is copied from one "source" port to another
destination or "mirror" port; an analyzer attached to the mirror port then
sees all of the traffic entering and exiting the source port - in theory.
It is possible (depending upon the switch) to have multiple "source" ports
sending traffic to a single "mirror" port, however, one must be careful of
this if you are in a high traffic situation as you may oversaturate the
mirror port and lose packets.

To make this work your RealSecure box has to be plugged into the designated
"mirror" port of the switch and not out behind your firewall A or B on a hub
somewhere.

If your switch does not support "mirroring" you can always put a second NIC
card in the RealSecure box and connect it to the firewall B segment.

Hope that helps a little.

Matt Grimes

> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: Friday, April 21, 2000 3:29 PM
> To: [EMAIL PROTECTED]
> Subject: Mirroring Ports for RealSecure
> 
> 
> We have two firewalls (firewall A and firewall B)on two 
> separate swithched segments.  We also run our web servers on 
> a swithched segment, with the RealSecure box sitting behind 
> firewall A.  I read somewhere about enabling port mirroring 
> on the firewall so the IDS can pick up the scans.  I wasn't 
> too sure what this meant.  Can anyone clarify what port 
> mirroring is and why the IDS needs to be configured this way 
> to work?  
> 
> Thanks,
> Mark
> 
> 


Reply via email to