Yes we are seeing the same problem. Mostly on higher volume sensors. We stop receiving alerts from the sensors and the sensors cpu is pegged at 100% (process issCSF). We attempted using a blank policy to determine if it was something in the policy causing the hang-up. Sensors still cpu spiked within 30 min. Rolled all sensors off of 20.6, problem solved.
-----Original Message----- From: Dykes, Sandra H [mailto:SANDRA.H.DYKES@;saic.com] Sent: Wednesday, November 06, 2002 15:53 To: '[EMAIL PROTECTED]' Subject: RE: [ISSForum] network sensor MU 20.6 We are having the same problem with 20.6. Loaded it to both sensors and now for two days no messages from the sensors. Going to remove this update too! Just removed it and immediately started getting events! -----Original Message----- From: Espen Rahd [mailto:espen@;novait.no] Sent: Wednesday, November 06, 2002 8:58 AM To: [EMAIL PROTECTED] Subject: RE: [ISSForum] network sensor MU 20.6 Same problem here! -----Original Message----- From: Didea, Gheorghe [mailto:gdidea@;heidrick.com] Sent: 5. november 2002 10:02 To: Issforum (E-mail) Subject: [ISSForum] network sensor MU 20.6 Hello, yesterday I upgrade from MU 20.5 to MU 20.6 After that no messages from my sensor. I downgrade to 20.5 and is working again. Any issue with 20.6? I'm using NS in NTServer 4.0 George _______________________________________________ ISSForum mailing list [EMAIL PROTECTED] _______________________________________________ ISSForum mailing list [EMAIL PROTECTED] _______________________________________________ ISSForum mailing list [EMAIL PROTECTED] _______________________________________________ ISSForum mailing list [EMAIL PROTECTED]
