Hi, we had the same problem with 20.6 . Since we applied XPU 20.7 everything seems to be ok again.
Regards Bjoern -----Original Message----- From: Stahlkrantz, Mats (Mats) [mailto:mstahlkrantz@;lucent.com] Posted At: Friday, November 08, 2002 6:33 PM Posted To: ISS Mailingliste Conversation: [ISSForum] network sensor MU 20.6 Subject: RE: [ISSForum] network sensor MU 20.6 I haven't had any problems with 20.7 since installing it, but I'm watching the sensors closely just to make sure. -----Original Message----- From: Bob Fillmore [mailto:fillmore@;nrn1.NRCan.gc.ca] Sent: Friday, November 08, 2002 9:17 AM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: [ISSForum] network sensor MU 20.6 I also saw this problem last Sunday when I applied the XPU, so I uninstalled the XPU and opened a case with ISS. Still no solution from them (they asked me to collect some data, but I haven't had a chance yet). Anybody know if XPU 20.7 fixes it? (it just came out) - Bob Griswold,Aaron W. writes: > > > Yes we are seeing the same problem. Mostly on higher volume sensors. > We stop receiving alerts from the sensors and the sensors cpu is pegged > at 100% (process issCSF). We attempted using a blank policy to > determine if it was something in the policy causing the hang-up. > Sensors still cpu spiked within 30 min. Rolled all sensors off of 20.6, > problem solved. > > > -----Original Message----- > From: Dykes, Sandra H [mailto:SANDRA.H.DYKES@;saic.com] > Sent: Wednesday, November 06, 2002 15:53 > To: '[EMAIL PROTECTED]' > Subject: RE: [ISSForum] network sensor MU 20.6 > > We are having the same problem with 20.6. Loaded it to both sensors and > now > for two days no messages from the sensors. Going to remove this update > too! > > Just removed it and immediately started getting events! > > > > > -----Original Message----- > From: Espen Rahd [mailto:espen@;novait.no] > Sent: Wednesday, November 06, 2002 8:58 AM > To: [EMAIL PROTECTED] > Subject: RE: [ISSForum] network sensor MU 20.6 > > > Same problem here! > > -----Original Message----- > From: Didea, Gheorghe [mailto:gdidea@;heidrick.com] > Sent: 5. november 2002 10:02 > To: Issforum (E-mail) > Subject: [ISSForum] network sensor MU 20.6 > > > Hello, > > yesterday I upgrade from MU 20.5 to MU 20.6 After that no messages from > my > sensor. I downgrade to 20.5 and is working again. > Any issue with 20.6? > I'm using NS in NTServer 4.0 > > George > > _______________________________________________ > ISSForum mailing list > [EMAIL PROTECTED] > _______________________________________________ > ISSForum mailing list > [EMAIL PROTECTED] > _______________________________________________ > ISSForum mailing list > [EMAIL PROTECTED] > > > > _______________________________________________ > ISSForum mailing list > [EMAIL PROTECTED] > > -- Bob Fillmore, Technical Services Division email: [EMAIL PROTECTED] Information Management Branch, Natural Resources Canada, Voice: (613) 992-2832 580 Booth St., Ottawa, Ontario, Canada K1A 0E4 FAX: (613) 996-2953 _______________________________________________ ISSForum mailing list [EMAIL PROTECTED] _______________________________________________ ISSForum mailing list [EMAIL PROTECTED] _______________________________________________ ISSForum mailing list [EMAIL PROTECTED]
