Good afternoon.
Has anyone had any problems with the interfaces on the g1200 appliance coming active when connecting devices. Ours is setup inline and we have had multiple problems when changing duplex or speed settings getting the connections to come up. We have tried both straight-through and crossover cables and sometimes we can get the connection up and other times we can't. Does the appliance have any type of ARP cache or MAC table that needs to be cleared to allow devices to connect? We have matched duplex and speed settings across the board and are still having issues. Any suggestions would be greatly appreciated. Chris Christopher Klepp Network Administrator Central Transport Int. 34200 Mound Road Sterling Heights, MI 48310 (586)939-7000 Ext. 3683 Email: [EMAIL PROTECTED] This transmission is confidential and intended solely for the person or organization to whom it is addressed. It may contain privileged and confidential information. If you are not the intended recipient, you should not copy, distribute or take any action in reliance on it. If you have received this transmission in error, please notify the sender at the e-mail address above. _______________________________________________ ISSForum mailing list ISSForum@iss.net TO UNSUBSCRIBE OR CHANGE YOUR SUBSCRIPTION, go to https://atla-mm1.iss.net/mailman/listinfo/issforum To contact the ISSForum Moderator, send email to [EMAIL PROTECTED] The ISSForum mailing list is hosted and managed by Internet Security Systems, 6303 Barfield Road, Atlanta, Georgia, USA 30328.