Hi, Request u to check the port speed and mode from the switch/router first. Cases have come where the router was 10 full and IPS port was being configured as 100 full as usual practice around. Always hardcode the link on both ends To further understand log into switch/router and see interface details like crc or up with errors etc. Configure false to link propagation in link adaptor properties in local setting of the box to realize which kink is a problem Any further query r most welcome.
Best Regards, Abhishek Gupta Security Consultant, West India -----Original Message----- From: [EMAIL PROTECTED] On Behalf Of Christopher Klepp Sent: Friday, July 07, 2006 10:43 PM To: [EMAIL PROTECTED] Subject: [ISSForum] Problems with g1200 interfaces. Good afternoon. Has anyone had any problems with the interfaces on the g1200 appliance coming active when connecting devices. Ours is setup inline and we have had multiple problems when changing duplex or speed settings getting the connections to come up. We have tried both straight-through and crossover cables and sometimes we can get the connection up and other times we can't. Does the appliance have any type of ARP cache or MAC table that needs to be cleared to allow devices to connect? We have matched duplex and speed settings across the board and are still having issues. Any suggestions would be greatly appreciated. Chris Christopher Klepp Network Administrator Central Transport Int. 34200 Mound Road Sterling Heights, MI 48310 (586)939-7000 Ext. 3683 Email: [EMAIL PROTECTED] This transmission is confidential and intended solely for the person or organization to whom it is addressed. It may contain privileged and confidential information. If you are not the intended recipient, you should not copy, distribute or take any action in reliance on it. If you have received this transmission in error, please notify the sender at the e-mail address above. _______________________________________________ ISSForum mailing list [email protected] TO UNSUBSCRIBE OR CHANGE YOUR SUBSCRIPTION, go to https://atla-mm1.iss.net/mailman/listinfo/issforum To contact the ISSForum Moderator, send email to [EMAIL PROTECTED] The ISSForum mailing list is hosted and managed by Internet Security Systems, 6303 Barfield Road, Atlanta, Georgia, USA 30328. _______________________________________________ ISSForum mailing list [email protected] TO UNSUBSCRIBE OR CHANGE YOUR SUBSCRIPTION, go to https://atla-mm1.iss.net/mailman/listinfo/issforum To contact the ISSForum Moderator, send email to [EMAIL PROTECTED] The ISSForum mailing list is hosted and managed by Internet Security Systems, 6303 Barfield Road, Atlanta, Georgia, USA 30328.
