Good point, thanks. We will update the doc a little later after we review and verify the chanages.
thanks - jf.ding On Thu, Aug 29, 2013 at 10:57:17AM +0000, VanCutsem, Geoffroy wrote: > > > From: Hanchett, Paul [mailto:[email protected]] > Sent: Wednesday, August 28, 2013 5:22 PM > To: Zhang, Qiang Z > Cc: VanCutsem, Geoffroy; Steven Maurer; [email protected] > Subject: Re: Building Tizen IVI 3.0 locally with gbs > > Thanks for updating the docs! I will try this as soon as I get a chance > (probably tomorrow). > > BTW, Steve has pointed out to me that if you've set up your SSH config file > as directed, specifying the port number (":29418") to gbs is unnecessary. > > I'd suggest removing parameters from the example that ought to be configured > elsewhere, as it dilutes the point of the feature being documented. As an > alternative, there could be a discussion of exactly what each parameter means. > > Since SSH being well configured is a pre-requirement, it might be well to > just point to the SSH configuration page-- For example "If this command > fails, make sure the SSH host configuration is established, as described in > <link to page>." > > [Geoffroy] +1 > > Could we update section 2 of > https://source.tizen.org/documentation/developer-guide/creating-tizen-platform-image-scratch-through-local-build > to reflect this? > > Cheers, > Geoffroy > Intel Corporation NV/SA > Kings Square, Veldkant 31 > 2550 Kontich > RPM (Bruxelles) 0415.497.718. > Citibank, Brussels, account 570/1031255/09 > > This e-mail and any attachments may contain confidential material for the > sole use of the intended recipient(s). Any review or distribution by others > is strictly prohibited. If you are not the intended recipient, please contact > the sender and delete all copies. > _______________________________________________ > IVI mailing list > [email protected] > https://lists.tizen.org/listinfo/ivi _______________________________________________ IVI mailing list [email protected] https://lists.tizen.org/listinfo/ivi
