On Fri, 2013-10-11 at 10:40 +0000, Bityutskiy, Artem wrote: > It even used to be that if you unload the i915 driver and load it again, > you end up with different numbering. Nowadays it is not the case > anymore, but nevertheless, the driver still does not give guarantees WRT > port numbering.
Let me also elaborate a bit on the numbering, since this is a bit confusing. HDMIB and HDMIC refer to the port numbers as they are referred to in the genx specification. There is no HDMIA on Baytrail Similarly, you can sometimes see people talking about HDMI2 and HDMI3, these are HDMIB and HDMIC. Now, the kernel numbering in sysfs has nothing to do with this numbering. The number is simply assigned sequentially, starting from 1. And this is what you also use in weston.ini. Hopefully it should make things clear, at least this was one point of confusion for me at recently, so I decided to share this. -- Best Regards, Artem Bityutskiy _______________________________________________ IVI mailing list [email protected] https://lists.tizen.org/listinfo/ivi
