Hi Rudi, The first thing I’d check is whether you have an antenna connected. Some earlier versions of the NDiS-166 only had one antenna connector at the back and you could therefore only have either BT or WiFi. It’s that’s the case, try to open up the box and change the antenna to the other connector on the 6235 AGN card for a quick verification that WiFi is functioning correctly.
Cheers, Geoffroy From: IVI [mailto:[email protected]] On Behalf Of Rudolf Streif Sent: Monday, June 16, 2014 7:10 AM To: [email protected] Subject: Wifi with Intel Centrino 6235 with Tizen IVI on NDIS166 I have Tizen IVI (don't exactly know what build but kernel 3.12.4-10.1) on NDIS166 that has an Intel Centrino 6235 AGN with BT card installed. BT works fine but Wifi does not. Diagnostics: * iwlwifi and iwldvn modules are loaded. * The firmware seems to be the correct version: iwlwifi-6000g2b-6.mode. * ifconfig shows the device as wlan0. * rfkill list shows 0: hci0: Bluetooth Soft blocked:no Hard blocked: no 3: phy2: Wireless LAN Soft blocked:no Hard blocked: no * connmanctl technologies /net/connman/technologies/wifi Name = WIFI Type = wifi Powered = True Connected = False Tethering = False Hidden = False However, when I scan for wifi networks the scanning finishes almost immediately with "Scan completed for wifi" with no networks found (although there are a couple of them around). Any hints would be appreciated. Thanks, Rudi Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
_______________________________________________ IVI mailing list [email protected] https://lists.tizen.org/listinfo/ivi
