Thanks for your help!

1) Make sure you have the driver for the MMC controller built-in (given you 
don?t use an initrd)
2) Double-check the device/partition name of the MMC card 
3) Insert a ?rootwait? in your kernel command-line 
4) Have you replaced the /sbin/init file on the Tizen filesystem by any chance?

I checked these items again.
Smacks is already disabled.
Since it can boot with ubuntu file-system,i think 1) is no problem.
I never change the files on the Tizen filesystem but /lib/modules/3.5.0-rc6 .

the device/partition name of the MMC card:
Device Boot      Start         End      Blocks   Id  System
/dev/mmcblk0p1   *        2048      206847      102400    c  W95 FAT32 (LBA)
/dev/mmcblk0p2          206848    21178367    10485760   83  Linux
/dev/mmcblk0p3        21178368    25372671     2097152   83  Linux
/dev/mmcblk0p4        25372672    30535679     2581504   83  Linux

Now,i change the bootargs and add some logs in the kernel source(in function 
kernel_execve),it's still not working.

root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait console=ttySAC2,115200 noinitrd 
init=/sbin/init

During the log, i wonder if the systemd is worked.Did it really get stuck in 
/sbin/init or systemd is worked but i just don't know?

log:
[    5.600000] ft5x0x_ts 3-0038: Firmware version 0xa6
[    5.600000] ft5x0x_ts 3-0038: FocalTech ft5x0x TouchScreen initialized
[    5.610000] s3c-rtc s3c64xx-rtc: setting system clock to 2013-01-01 12:00:02
UTC (1357041602)
[    5.615000] hotplug_policy_init: intialised with policy : DVFS_NR_BASED_HOTPL
UG
[    5.625000] ALSA device list:
[    5.625000]   #0: iTOP-4412-Audio
[    6.125000] EXT4-fs (mmcblk0p2): recovery complete
[    6.130000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O
pts: (null)
[    6.135000] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    6.145000] Freeing init memory: 232K
[    6.145000] init_post
[    6.160000] kernel_execve ret = 0
[    6.165000] kernel_execve filename = /sbin/init
[    6.265000] kernel_execve ret = 0
[    6.270000] kernel_execve filename = /sbin/modprobe
[    6.310000] kernel_execve ret = 0
[    6.310000] kernel_execve filename = /sbin/modprobe
[    6.930000] CPU3: shutdown
[    7.435000] CPU2: shutdown
[    7.845000] CPU1: shutdown

Thanks for your help!

Best Regards,

kong ling


> From: [email protected]
> Subject: IVI Digest, Vol 28, Issue 53
> To: [email protected]
> Date: Thu, 26 Jun 2014 15:26:22 +0000
> 
> Send IVI mailing list submissions to
>       [email protected]
> 
> To subscribe or unsubscribe via the World Wide Web, visit
>       https://lists.tizen.org/listinfo/ivi
> or, via email, send a message with subject or body 'help' to
>       [email protected]
> 
> You can reach the person managing the list at
>       [email protected]
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of IVI digest..."
> 
> 
> Today's Topics:
> 
>    1. Re: Can not Boot Tizen Common on Exynos4412 (Dominig ar Foll)
>    2. Re: Can not Boot Tizen Common on Exynos4412 (Philippe Coval)
>    3. RE: Can not Boot Tizen Common on Exynos4412 (VanCutsem, Geoffroy)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Thu, 26 Jun 2014 16:14:08 +0200
> From: Dominig ar Foll <[email protected]>
> To: [email protected]
> Subject: Re: Can not Boot Tizen Common on Exynos4412
> Message-ID: <[email protected]>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> Hello,
> 
> I doubt that your kernel support Smacks security label.
> Upgrade your kernel first and check that you have enable Smacks.
> 
> Dominig
> 
> Le 25/06/2014 07:25, kongling a ?crit :
> > Hi,
> >
> > My platform is called "iTOP-4412" that is made in china.
> >
> > I have 3.5 kernel and it can boot with ubuntu file-system. But the
> > Tizen common still get stuck in "Freeing init memory:xxx K".
> >
> > My bootargs is "root=/dev/mmcblk2 rw rootfstype=ext4
> > console=ttySAC2,115200 noinitrd init=/sbin/init".
> >
> > Could you help me?
> >
> > Best Regards,
> >
> > kong ling
> >
> > ------------------------------------------------------------------------
> > Date: Fri, 20 Jun 2014 10:05:07 +0200
> > Subject: Re: Can not Boot Tizen Common on Exynos4412
> > From: [email protected]
> > To: [email protected]
> > CC: [email protected]
> >
> > Hi
> >
> >
> > What is your exynos4412 platform ?
> > make sure it's *exynos4412-trats2 (rdpd?)
> > *
> > common-arm-09.06.2014.tar.lzma (uses exynos4412-trats2.dtb
> > KVERS=3.10.39+) 
> >
> >
> > for odroid u3 you need to rebuild kernel and join device tree file to
> > zImage on the 1st part
> >
> > it will boot with default bootloader
> > but I dont have a working .config file to share yet
> >
> >
> > hope it helps
> >
> >
> >
> >
> > On Fri, Jun 20, 2014 at 9:48 AM, kongling <[email protected]
> > <mailto:[email protected]>> wrote:
> >
> >     Hi,
> >
> >     I'm trying to run the file-system in
> >     [common-arm-09.06.2014.tar.lzma
> >     (https://wiki.tizen.org/wiki/ARM#SUNXI_.28AllWinner.29)] with
> >     Exynos4412.
> >
> >     The kernel version is 3.0.15 and i think it got stuck in [sbin/init].
> >
> >     [    3.525490] Freeing init memory: 212K
> >     [    3.530498] Failed to execute /linuxrc.  Attempting defaults...
> >     [   62.558748] failed to copy MFC F/W during init
> >     [   65.542356] CPU1: shutdown
> >
> >     Is this kernel's version too low to run the file-system?
> >
> >     Best Regards,
> >
> >     kong ling
> >
> >     _______________________________________________
> >     IVI mailing list
> >     [email protected] <mailto:[email protected]>
> >     https://lists.tizen.org/listinfo/ivi
> >
> >
> >
> >
> > -- 
> > Related Obsession : http://rzr.online.fr/q/harmattan
> >
> >
> > _______________________________________________
> > IVI mailing list
> > [email protected]
> > https://lists.tizen.org/listinfo/ivi
> 
> -- 
> Dominig ar Foll
> Senior Software Architect
> Intel Open Source Technology Centre
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> <http://lists.tizen.org/pipermail/ivi/attachments/20140626/dda86470/attachment-0001.html>
> 
> ------------------------------
> 
> Message: 2
> Date: Thu, 26 Jun 2014 17:22:28 +0200
> From: Philippe Coval <[email protected]>
> To: Dominig ar Foll <[email protected]>
> Cc: "[email protected]" <[email protected]>
> Subject: Re: Can not Boot Tizen Common on Exynos4412
> Message-ID:
>       <CACJwpnuxi785dtwsKpM=guun0pw81ucny_ahgrz85kwepxg...@mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
> 
> It should boot without smack since you're on linux-3.5 you wont have it
> 
> I had it also disabled on tizen-sunxi (linux-3.4)
> 
> Even tizen's linux-3.10 branch for odroid
> has smack disabled (seems smack is not the top priority yet)
> 
> I would suggest you to try the same config file you have on ubuntu and try
> again
> 
> Later
> 
> 
> 
> 2014-06-26 16:14 GMT+02:00 Dominig ar Foll <[email protected]>:
> 
> >  Hello,
> >
> > I doubt that your kernel support Smacks security label.
> > Upgrade your kernel first and check that you have enable Smacks.
> >
> > Dominig
> >
> > Le 25/06/2014 07:25, kongling a ?crit :
> >
> > Hi,
> >
> > My platform is called "iTOP-4412" that is made in china.
> >
> > I have 3.5 kernel and it can boot with ubuntu file-system. But the Tizen
> > common still get stuck in "Freeing init memory:xxx K".
> >
> > My bootargs is "root=/dev/mmcblk2 rw rootfstype=ext4
> > console=ttySAC2,115200 noinitrd init=/sbin/init".
> >
> > Could you help me?
> >
> > Best Regards,
> >
> > kong ling
> >
> >  ------------------------------
> > Date: Fri, 20 Jun 2014 10:05:07 +0200
> > Subject: Re: Can not Boot Tizen Common on Exynos4412
> > From: [email protected]
> > To: [email protected]
> > CC: [email protected]
> >
> > Hi
> >
> >
> > What is your exynos4412 platform ?
> > make sure it's
> > *exynos4412-trats2 (rdpd?) *
> > common-arm-09.06.2014.tar.lzma (uses exynos4412-trats2.dtb KVERS=3.10.39+)
> >
> >
> > for odroid u3 you need to rebuild kernel and join device tree file to
> > zImage on the 1st part
> >
> > it will boot with default bootloader
> > but I dont have a working .config file to share yet
> >
> >
> > hope it helps
> >
> >
> >
> >
> > On Fri, Jun 20, 2014 at 9:48 AM, kongling <[email protected]> wrote:
> >
> >  Hi,
> >
> > I'm trying to run the file-system in [common-arm-09.06.2014.tar.lzma (
> > https://wiki.tizen.org/wiki/ARM#SUNXI_.28AllWinner.29)] with Exynos4412.
> >
> > The kernel version is 3.0.15 and i think it got stuck in [sbin/init].
> >
> > [    3.525490] Freeing init memory: 212K
> > [    3.530498] Failed to execute /linuxrc.  Attempting defaults...
> > [   62.558748] failed to copy MFC F/W during init
> > [   65.542356] CPU1: shutdown
> >
> > Is this kernel's version too low to run the file-system?
> >
> > Best Regards,
> >
> > kong ling
> >
> > _______________________________________________
> > IVI mailing list
> > [email protected]
> > https://lists.tizen.org/listinfo/ivi
> >
> >
> >
> >
> > --
> > Related Obsession : http://rzr.online.fr/q/harmattan
> >
> >
> > _______________________________________________
> > IVI mailing [email protected]https://lists.tizen.org/listinfo/ivi
> >
> >
> > --
> > Dominig ar Foll
> > Senior Software Architect
> > Intel Open Source Technology Centre
> >
> >
> > _______________________________________________
> > IVI mailing list
> > [email protected]
> > https://lists.tizen.org/listinfo/ivi
> >
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> <http://lists.tizen.org/pipermail/ivi/attachments/20140626/f4e51e95/attachment-0001.html>
> 
> ------------------------------
> 
> Message: 3
> Date: Thu, 26 Jun 2014 15:29:45 +0000
> From: "VanCutsem, Geoffroy" <[email protected]>
> To: Philippe Coval <[email protected]>, Dominig ar
>       Foll <[email protected]>
> Cc: "[email protected]" <[email protected]>
> Subject: RE: Can not Boot Tizen Common on Exynos4412
> Message-ID:
>       <b23de4404747de4181d616a0059ccece30150...@irsmsx104.ger.corp.intel.com>
>       
> Content-Type: text/plain; charset="utf-8"
> 
> A shot in the dark from me but here are the next few things you should check:
> 
> -          Make sure you have the driver for the MMC controller built-in 
> (given you don?t use an initrd)
> 
> -          Double-check the device/partition name of the MMC card
> 
> -          Insert a ?rootwait? in your kernel command-line
> 
> -          Have you replaced the /sbin/init file on the Tizen filesystem by 
> any chance?
> 
> Thanks,
> Geoffroy
> 
> From: IVI [mailto:[email protected]] On Behalf Of Philippe Coval
> Sent: Thursday, June 26, 2014 5:22 PM
> To: Dominig ar Foll
> Cc: [email protected]
> Subject: Re: Can not Boot Tizen Common on Exynos4412
> 
> It should boot without smack since you're on linux-3.5 you wont have it
> I had it also disabled on tizen-sunxi (linux-3.4)
> Even tizen's linux-3.10 branch for odroid
> has smack disabled (seems smack is not the top priority yet)
> I would suggest you to try the same config file you have on ubuntu and try 
> again
> Later
> 
> 2014-06-26 16:14 GMT+02:00 Dominig ar Foll 
> <[email protected]<mailto:[email protected]>>:
> Hello,
> 
> I doubt that your kernel support Smacks security label.
> Upgrade your kernel first and check that you have enable Smacks.
> 
> Dominig
> Le 25/06/2014 07:25, kongling a ?crit :
> Hi,
> 
> My platform is called "iTOP-4412" that is made in china.
> 
> I have 3.5 kernel and it can boot with ubuntu file-system. But the Tizen 
> common still get stuck in "Freeing init memory:xxx K".
> 
> My bootargs is "root=/dev/mmcblk2 rw rootfstype=ext4 console=ttySAC2,115200 
> noinitrd init=/sbin/init".
> 
> Could you help me?
> 
> Best Regards,
> 
> kong ling
> ________________________________
> Date: Fri, 20 Jun 2014 10:05:07 +0200
> Subject: Re: Can not Boot Tizen Common on Exynos4412
> From: [email protected]<http://[email protected]>
> To: [email protected]<mailto:[email protected]>
> CC: [email protected]<mailto:[email protected]>
> Hi
> 
> 
> What is your exynos4412 platform ?
> make sure it's exynos4412-trats2 (rdpd?)
> 
> common-arm-09.06.2014.tar.lzma (uses exynos4412-trats2.dtb KVERS=3.10.39+)
> 
> 
> for odroid u3 you need to rebuild kernel and join device tree file to zImage 
> on the 1st part
> 
> it will boot with default bootloader
> but I dont have a working .config file to share yet
> 
> 
> hope it helps
> 
> 
> On Fri, Jun 20, 2014 at 9:48 AM, kongling 
> <[email protected]<mailto:[email protected]>> wrote:
> Hi,
> 
> I'm trying to run the file-system in [common-arm-09.06.2014.tar.lzma 
> (https://wiki.tizen.org/wiki/ARM#SUNXI_.28AllWinner.29)] with Exynos4412.
> 
> The kernel version is 3.0.15 and i think it got stuck in [sbin/init].
> 
> [    3.525490] Freeing init memory: 212K
> [    3.530498] Failed to execute /linuxrc.  Attempting defaults...
> [   62.558748] failed to copy MFC F/W during init
> [   65.542356] CPU1: shutdown
> 
> Is this kernel's version too low to run the file-system?
> 
> Best Regards,
> 
> kong ling
> 
> _______________________________________________
> IVI mailing list
> [email protected]<mailto:[email protected]>
> https://lists.tizen.org/listinfo/ivi
> 
> 
> 
> --
> Related Obsession : http://rzr.online.fr/q/harmattan
> 
> 
> _______________________________________________
> 
> IVI mailing list
> 
> [email protected]<mailto:[email protected]>
> 
> https://lists.tizen.org/listinfo/ivi
> 
> 
> --
> 
> Dominig ar Foll
> 
> Senior Software Architect
> 
> Intel Open Source Technology Centre
> 
> _______________________________________________
> IVI mailing list
> [email protected]<mailto:[email protected]>
> https://lists.tizen.org/listinfo/ivi
> 
> Intel Corporation NV/SA
> Kings Square, Veldkant 31
> 2550 Kontich
> RPM (Bruxelles) 0415.497.718. 
> Citibank, Brussels, account 570/1031255/09
> 
> This e-mail and any attachments may contain confidential material for the 
> sole use of the intended recipient(s). Any review or distribution by others 
> is strictly prohibited. If you are not the intended recipient, please contact 
> the sender and delete all copies.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> <http://lists.tizen.org/pipermail/ivi/attachments/20140626/e2429b8e/attachment.html>
> 
> ------------------------------
> 
> Subject: Digest Footer
> 
> _______________________________________________
> IVI mailing list
> [email protected]
> https://lists.tizen.org/listinfo/ivi
> 
> 
> ------------------------------
> 
> End of IVI Digest, Vol 28, Issue 53
> ***********************************
                                          
_______________________________________________
IVI mailing list
[email protected]
https://lists.tizen.org/listinfo/ivi

Reply via email to