It looks like the kernel picked up the filesystem and could load drivers. Maybe this is just a problem with the graphical environment. Can you try to do a 'Ctrl-Alt-F2' to see if you get a console (or try also Ctrl-Alt-F3 to F6).
Geoffroy From: kongling [mailto:[email protected]] Sent: Friday, June 27, 2014 8:09 AM To: VanCutsem, Geoffroy; [email protected]; [email protected] Cc: [email protected] Subject: RE: Re: Can not Boot Tizen Common on Exynos4412 Thanks for your help! 1) Make sure you have the driver for the MMC controller built-in (given you don?t use an initrd) 2) Double-check the device/partition name of the MMC card 3) Insert a ?rootwait? in your kernel command-line 4) Have you replaced the /sbin/init file on the Tizen filesystem by any chance? I checked these items again. Smacks is already disabled. Since it can boot with ubuntu file-system,i think 1) is no problem. I never change the files on the Tizen filesystem but /lib/modules/3.5.0-rc6 . the device/partition name of the MMC card: Device Boot Start End Blocks Id System /dev/mmcblk0p1 * 2048 206847 102400 c W95 FAT32 (LBA) /dev/mmcblk0p2 206848 21178367 10485760 83 Linux /dev/mmcblk0p3 21178368 25372671 2097152 83 Linux /dev/mmcblk0p4 25372672 30535679 2581504 83 Linux Now,i change the bootargs and add some logs in the kernel source(in function kernel_execve),it's still not working. root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait console=ttySAC2,115200 noinitrd init=/sbin/init During the log, i wonder if the systemd is worked.Did it really get stuck in /sbin/init or systemd is worked but i just don't know? log: [ 5.600000] ft5x0x_ts 3-0038: Firmware version 0xa6 [ 5.600000] ft5x0x_ts 3-0038: FocalTech ft5x0x TouchScreen initialized [ 5.610000] s3c-rtc s3c64xx-rtc: setting system clock to 2013-01-01 12:00:02 UTC (1357041602) [ 5.615000] hotplug_policy_init: intialised with policy : DVFS_NR_BASED_HOTPL UG [ 5.625000] ALSA device list: [ 5.625000] #0: iTOP-4412-Audio [ 6.125000] EXT4-fs (mmcblk0p2): recovery complete [ 6.130000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O pts: (null) [ 6.135000] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 6.145000] Freeing init memory: 232K [ 6.145000] init_post [ 6.160000] kernel_execve ret = 0 [ 6.165000] kernel_execve filename = /sbin/init [ 6.265000] kernel_execve ret = 0 [ 6.270000] kernel_execve filename = /sbin/modprobe [ 6.310000] kernel_execve ret = 0 [ 6.310000] kernel_execve filename = /sbin/modprobe [ 6.930000] CPU3: shutdown [ 7.435000] CPU2: shutdown [ 7.845000] CPU1: shutdown Thanks for your help! Best Regards, kong ling > From: [email protected]<mailto:[email protected]> > Subject: IVI Digest, Vol 28, Issue 53 > To: [email protected]<mailto:[email protected]> > Date: Thu, 26 Jun 2014 15:26:22 +0000 > > Send IVI mailing list submissions to > [email protected]<mailto:[email protected]> > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.tizen.org/listinfo/ivi > or, via email, send a message with subject or body 'help' to > [email protected]<mailto:[email protected]> > > You can reach the person managing the list at > [email protected]<mailto:[email protected]> > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of IVI digest..." > > > Today's Topics: > > 1. Re: Can not Boot Tizen Common on Exynos4412 (Dominig ar Foll) > 2. Re: Can not Boot Tizen Common on Exynos4412 (Philippe Coval) > 3. RE: Can not Boot Tizen Common on Exynos4412 (VanCutsem, Geoffroy) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 26 Jun 2014 16:14:08 +0200 > From: Dominig ar Foll > <[email protected]<mailto:[email protected]>> > To: [email protected]<mailto:[email protected]> > Subject: Re: Can not Boot Tizen Common on Exynos4412 > Message-ID: <[email protected]<mailto:[email protected]>> > Content-Type: text/plain; charset="iso-8859-1" > > Hello, > > I doubt that your kernel support Smacks security label. > Upgrade your kernel first and check that you have enable Smacks. > > Dominig > > Le 25/06/2014 07:25, kongling a ?crit : > > Hi, > > > > My platform is called "iTOP-4412" that is made in china. > > > > I have 3.5 kernel and it can boot with ubuntu file-system. But the > > Tizen common still get stuck in "Freeing init memory:xxx K". > > > > My bootargs is "root=/dev/mmcblk2 rw rootfstype=ext4 > > console=ttySAC2,115200 noinitrd init=/sbin/init". > > > > Could you help me? > > > > Best Regards, > > > > kong ling > > > > ------------------------------------------------------------------------ > > Date: Fri, 20 Jun 2014 10:05:07 +0200 > > Subject: Re: Can not Boot Tizen Common on Exynos4412 > > From: [email protected]<http://[email protected]> > > To: [email protected]<mailto:[email protected]> > > CC: [email protected]<mailto:[email protected]> > > > > Hi > > > > > > What is your exynos4412 platform ? > > make sure it's *exynos4412-trats2 (rdpd?) > > * > > common-arm-09.06.2014.tar.lzma (uses exynos4412-trats2.dtb > > KVERS=3.10.39+) > > > > > > for odroid u3 you need to rebuild kernel and join device tree file to > > zImage on the 1st part > > > > it will boot with default bootloader > > but I dont have a working .config file to share yet > > > > > > hope it helps > > > > > > > > > > On Fri, Jun 20, 2014 at 9:48 AM, kongling <[email protected] <mailto:[email protected]%0b>> > <mailto:[email protected]>> wrote: > > > > Hi, > > > > I'm trying to run the file-system in > > [common-arm-09.06.2014.tar.lzma > > (https://wiki.tizen.org/wiki/ARM#SUNXI_.28AllWinner.29)] with > > Exynos4412. > > > > The kernel version is 3.0.15 and i think it got stuck in [sbin/init]. > > > > [ 3.525490] Freeing init memory: 212K > > [ 3.530498] Failed to execute /linuxrc. Attempting defaults... > > [ 62.558748] failed to copy MFC F/W during init > > [ 65.542356] CPU1: shutdown > > > > Is this kernel's version too low to run the file-system? > > > > Best Regards, > > > > kong ling > > > > _______________________________________________ > > IVI mailing list > > [email protected]<mailto:[email protected]> <mailto:[email protected]> > > https://lists.tizen.org/listinfo/ivi > > > > > > > > > > -- > > Related Obsession : http://rzr.online.fr/q/harmattan > > > > > > _______________________________________________ > > IVI mailing list > > [email protected]<mailto:[email protected]> > > https://lists.tizen.org/listinfo/ivi > > -- > Dominig ar Foll > Senior Software Architect > Intel Open Source Technology Centre > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > <http://lists.tizen.org/pipermail/ivi/attachments/20140626/dda86470/attachment-0001.html> > > ------------------------------ > > Message: 2 > Date: Thu, 26 Jun 2014 17:22:28 +0200 > From: Philippe Coval > <[email protected]<mailto:[email protected]>> > To: Dominig ar Foll > <[email protected]<mailto:[email protected]>> > Cc: "[email protected]<mailto:[email protected]>" > <[email protected]<mailto:[email protected]>> > Subject: Re: Can not Boot Tizen Common on Exynos4412 > Message-ID: > <CACJwpnuxi785dtwsKpM=guun0pw81ucny_ahgrz85kwepxg...@mail.gmail.com<mailto:CACJwpnuxi785dtwsKpM=guun0pw81ucny_ahgrz85kwepxg...@mail.gmail.com>> > Content-Type: text/plain; charset="utf-8" > > It should boot without smack since you're on linux-3.5 you wont have it > > I had it also disabled on tizen-sunxi (linux-3.4) > > Even tizen's linux-3.10 branch for odroid > has smack disabled (seems smack is not the top priority yet) > > I would suggest you to try the same config file you have on ubuntu and try > again > > Later > > > > 2014-06-26 16:14 GMT+02:00 Dominig ar Foll > <[email protected]<mailto:[email protected]>>: > > > Hello, > > > > I doubt that your kernel support Smacks security label. > > Upgrade your kernel first and check that you have enable Smacks. > > > > Dominig > > > > Le 25/06/2014 07:25, kongling a ?crit : > > > > Hi, > > > > My platform is called "iTOP-4412" that is made in china. > > > > I have 3.5 kernel and it can boot with ubuntu file-system. But the Tizen > > common still get stuck in "Freeing init memory:xxx K". > > > > My bootargs is "root=/dev/mmcblk2 rw rootfstype=ext4 > > console=ttySAC2,115200 noinitrd init=/sbin/init". > > > > Could you help me? > > > > Best Regards, > > > > kong ling > > > > ------------------------------ > > Date: Fri, 20 Jun 2014 10:05:07 +0200 > > Subject: Re: Can not Boot Tizen Common on Exynos4412 > > From: [email protected]<http://[email protected]> > > To: [email protected]<mailto:[email protected]> > > CC: [email protected]<mailto:[email protected]> > > > > Hi > > > > > > What is your exynos4412 platform ? > > make sure it's > > *exynos4412-trats2 (rdpd?) * > > common-arm-09.06.2014.tar.lzma (uses exynos4412-trats2.dtb KVERS=3.10.39+) > > > > > > for odroid u3 you need to rebuild kernel and join device tree file to > > zImage on the 1st part > > > > it will boot with default bootloader > > but I dont have a working .config file to share yet > > > > > > hope it helps > > > > > > > > > > On Fri, Jun 20, 2014 at 9:48 AM, kongling > > <[email protected]<mailto:[email protected]>> wrote: > > > > Hi, > > > > I'm trying to run the file-system in [common-arm-09.06.2014.tar.lzma ( > > https://wiki.tizen.org/wiki/ARM#SUNXI_.28AllWinner.29)] with Exynos4412. > > > > The kernel version is 3.0.15 and i think it got stuck in [sbin/init]. > > > > [ 3.525490] Freeing init memory: 212K > > [ 3.530498] Failed to execute /linuxrc. Attempting defaults... > > [ 62.558748] failed to copy MFC F/W during init > > [ 65.542356] CPU1: shutdown > > > > Is this kernel's version too low to run the file-system? > > > > Best Regards, > > > > kong ling > > > > _______________________________________________ > > IVI mailing list > > [email protected]<mailto:[email protected]> > > https://lists.tizen.org/listinfo/ivi > > > > > > > > > > -- > > Related Obsession : http://rzr.online.fr/q/harmattan > > > > > > _______________________________________________ > > IVI mailing > > [email protected]https://lists.tizen.org/listinfo/ivi<mailto:[email protected]://lists.tizen.org/listinfo/ivi> > > > > > > -- > > Dominig ar Foll > > Senior Software Architect > > Intel Open Source Technology Centre > > > > > > _______________________________________________ > > IVI mailing list > > [email protected]<mailto:[email protected]> > > https://lists.tizen.org/listinfo/ivi > > > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > <http://lists.tizen.org/pipermail/ivi/attachments/20140626/f4e51e95/attachment-0001.html> > > ------------------------------ > > Message: 3 > Date: Thu, 26 Jun 2014 15:29:45 +0000 > From: "VanCutsem, Geoffroy" > <[email protected]<mailto:[email protected]>> > To: Philippe Coval > <[email protected]<mailto:[email protected]>>, > Dominig ar > Foll <[email protected]<mailto:[email protected]>> > Cc: "[email protected]<mailto:[email protected]>" > <[email protected]<mailto:[email protected]>> > Subject: RE: Can not Boot Tizen Common on Exynos4412 > Message-ID: > <b23de4404747de4181d616a0059ccece30150...@irsmsx104.ger.corp.intel.com<mailto:b23de4404747de4181d616a0059ccece30150...@irsmsx104.ger.corp.intel.com>> > > Content-Type: text/plain; charset="utf-8" > > A shot in the dark from me but here are the next few things you should check: > > - Make sure you have the driver for the MMC controller built-in (given you > don?t use an initrd) > > - Double-check the device/partition name of the MMC card > > - Insert a ?rootwait? in your kernel command-line > > - Have you replaced the /sbin/init file on the Tizen filesystem by any chance? > > Thanks, > Geoffroy > > From: IVI [mailto:[email protected]] On Behalf Of Philippe Coval > Sent: Thursday, June 26, 2014 5:22 PM > To: Dominig ar Foll > Cc: [email protected]<mailto:[email protected]> > Subject: Re: Can not Boot Tizen Common on Exynos4412 > > It should boot without smack since you're on linux-3.5 you wont have it > I had it also disabled on tizen-sunxi (linux-3.4) > Even tizen's linux-3.10 branch for odroid > has smack disabled (seems smack is not the top priority yet) > I would suggest you to try the same config file you have on ubuntu and try > again > Later > > 2014-06-26 16:14 GMT+02:00 Dominig ar Foll > <[email protected]<mailto:[email protected]<mailto:[email protected]%3cmailto:[email protected]>>>: > Hello, > > I doubt that your kernel support Smacks security label. > Upgrade your kernel first and check that you have enable Smacks. > > Dominig > Le 25/06/2014 07:25, kongling a ?crit : > Hi, > > My platform is called "iTOP-4412" that is made in china. > > I have 3.5 kernel and it can boot with ubuntu file-system. But the Tizen > common still get stuck in "Freeing init memory:xxx K". > > My bootargs is "root=/dev/mmcblk2 rw rootfstype=ext4 console=ttySAC2,115200 > noinitrd init=/sbin/init". > > Could you help me? > > Best Regards, > > kong ling > ________________________________ > Date: Fri, 20 Jun 2014 10:05:07 +0200 > Subject: Re: Can not Boot Tizen Common on Exynos4412 > From: > [email protected]<http://[email protected]<http://[email protected]%3chttp:/[email protected]>> > To: > [email protected]<mailto:[email protected]<mailto:[email protected]%3cmailto:[email protected]>> > CC: > [email protected]<mailto:[email protected]<mailto:[email protected]%3cmailto:[email protected]>> > Hi > > > What is your exynos4412 platform ? > make sure it's exynos4412-trats2 (rdpd?) > > common-arm-09.06.2014.tar.lzma (uses exynos4412-trats2.dtb KVERS=3.10.39+) > > > for odroid u3 you need to rebuild kernel and join device tree file to zImage > on the 1st part > > it will boot with default bootloader > but I dont have a working .config file to share yet > > > hope it helps > > > On Fri, Jun 20, 2014 at 9:48 AM, kongling > <[email protected]<mailto:[email protected]<mailto:[email protected]%3cmailto:[email protected]>>> > wrote: > Hi, > > I'm trying to run the file-system in [common-arm-09.06.2014.tar.lzma > (https://wiki.tizen.org/wiki/ARM#SUNXI_.28AllWinner.29)] with Exynos4412. > > The kernel version is 3.0.15 and i think it got stuck in [sbin/init]. > > [ 3.525490] Freeing init memory: 212K > [ 3.530498] Failed to execute /linuxrc. Attempting defaults... > [ 62.558748] failed to copy MFC F/W during init > [ 65.542356] CPU1: shutdown > > Is this kernel's version too low to run the file-system? > > Best Regards, > > kong ling > > _______________________________________________ > IVI mailing list > [email protected]<mailto:[email protected]<mailto:[email protected]%3cmailto:[email protected]>> > https://lists.tizen.org/listinfo/ivi > > > > -- > Related Obsession : http://rzr.online.fr/q/harmattan > > > _______________________________________________ > > IVI mailing list > > [email protected]<mailto:[email protected]<mailto:[email protected]%3cmailto:[email protected]>> > > https://lists.tizen.org/listinfo/ivi > > > -- > > Dominig ar Foll > > Senior Software Architect > > Intel Open Source Technology Centre > > _______________________________________________ > IVI mailing list > [email protected]<mailto:[email protected]<mailto:[email protected]%3cmailto:[email protected]>> > https://lists.tizen.org/listinfo/ivi > > Intel Corporation NV/SA > Kings Square, Veldkant 31 > 2550 Kontich > RPM (Bruxelles) 0415.497.718. > Citibank, Brussels, account 570/1031255/09 > > This e-mail and any attachments may contain confidential material for the > sole use of the intended recipient(s). Any review or distribution by others > is strictly prohibited. If you are not the intended recipient, please contact > the sender and delete all copies. > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > <http://lists.tizen.org/pipermail/ivi/attachments/20140626/e2429b8e/attachment.html> > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > IVI mailing list > [email protected]<mailto:[email protected]> > https://lists.tizen.org/listinfo/ivi > > > ------------------------------ > > End of IVI Digest, Vol 28, Issue 53 > *********************************** Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
_______________________________________________ IVI mailing list [email protected] https://lists.tizen.org/listinfo/ivi
