Hi Brian,
The change has been merged and is available from the ivi snapshot
tizen-ivi_20141014.5 - It should be present in the next ivi releases.
Best Regards.
On 10/10/2014 06:35 PM, Brian Warner wrote:
Hi Nicolas,
Nice! Thanks for your help on this. I appreciate you taking the time
to track it down.
I'll add this as a note to the instructions I send with NUCs
distributed through the development unit program, as well.
Best,
Brian
On Fri, Oct 10, 2014 at 12:15 PM, Nicolas Zingilé
<[email protected]
<mailto:[email protected]>> wrote:
Hi Brian,
The problem is that the size of the IVI image is too large to
reside in the mmc of the nuc device.
Sorry, I took some time to identify the problem because I added a
ssd disk in the nuc and I disabled the mmc in the bios. A patch
has been submitted to reduced the size of the Tizen IVI image :
https://review.tizen.org/gerrit/#/c/28633/
We will inform you when the patch will be merged.
Best Regards,
Nicolas
On 10/10/2014 04:44 PM, Brian Warner wrote:
Unfortunately the issue persists. I do note that the installer
seems to work fine with the common profile. It's just IVI that
fails when the download is at 0%.
Is there a way to dump a log file?
Best,
Brian
On Fri, Oct 10, 2014 at 9:45 AM, Brian Warner
<[email protected] <mailto:[email protected]>> wrote:
Hi Nicolas,
I am indeed using version 20141004. I'll give the updated
version a shot.
Best,
Brian
On Fri, Oct 10, 2014 at 3:48 AM, Nicolas Zingilé
<[email protected]
<mailto:[email protected]>> wrote:
Hi Brian,
You probably have an old version of the common-installer.
A few days ago, we noticed that a python dependency was
missing in bmap-tool and we added it
(https://review.tizen.org/gerrit/#/c/28293/).
So, can you check with the last version of the installer
:
http://download.tizen.org/snapshots/tizen/common/tizen-common_20141010.1/images/ia32-wayland/common-installer-mbr-i586/
?
Let us know if you encounter any problem.
Best Regards,
Nicolas
On 10/10/2014 03:40 AM, Brian Warner wrote:
Hi,
I installed tizen-common to the internal storage on a
NUC today, using common-installer on a USB key. The
system booted fine and appears to be working as
expected. So I decided to give tizen-ivi a try as well,
installing over the tizen-common image.
While running the installer as outlined here
(https://wiki.tizen.org/wiki/Install_tizen_image), the
installation proceeds past choosing the language (us)
and the profile (IVI). I chose a daily release, and
agreed to lose all the data on my device. It begins
downloading, and then almost immediately errors out:
"Bmaptool failed to flash your device. Do you want to
reboot?"
To be honest, I'm not even sure where to start
diagnosing what's going wrong. Has anyone else noticed
this, and if so, have you been able to fix it?
Best,
Brian
_______________________________________________
IVI mailing list
[email protected] <mailto:[email protected]>
https://lists.tizen.org/listinfo/ivi
--
---
Nicolas Zingilé
Intel OTC - Vannes FR
--
---
Nicolas Zingilé
Intel OTC - Vannes FR
--
---
Nicolas Zingilé
Intel OTC - Vannes FR
_______________________________________________
IVI mailing list
[email protected]
https://lists.tizen.org/listinfo/ivi
