Hi Brett,

Have you looked at the file /etc/xdg/weston/weston.ini?  Screen configuration 
is usually done there.  So to change orientation you could use transform=90 or 
transform=normal under the screen settings section.

Someone else can probably give you more or better info, or you could do a 
search for an example weston.ini in the weston source code or elsewhere on the 
internet.

Hope that helps a bit.


MICHAEL JOHNSON
Embedded Software Engineer

Symphony Teleca
Sunley House, 46 Jewry Street, Winchester, Hampshire, SO23 8RY
Phone: +441962868866, Fax: +441962868867
mailto:[email protected]
http://www.symphonyteleca.com

Teleca Limited, a company registered in England & Wales, registration number 
2773878, registered office at Sunley House, 46 Jewry Street, Winchester, 
Hampshire SO23 8RY. VAT registration number GB 674 6583 90

Follow what's going on at Symphony Teleca's blog on 
http://www.symphonyteleca.com/blog. Please consider the environment before you 
print.

Notice to recipient: This e-mail (including any attachments) is meant for the 
intended recipient only, may contain confidential and proprietary information, 
and is protected by law. If you received this e-mail in error, please 
immediately notify the sender of the error by return e-mail, delete this 
communication and any attachments, and shred any printouts. Unauthorized 
review, use, dissemination, distribution, copying or taking of any action based 
on this communication is strictly prohibited.

________________________________________
From: IVI [[email protected]] on behalf of Branch, Brett 
[[email protected]]
Sent: 17 November 2014 8:07 PM
To: [email protected]
Subject: Touchscreen configuration?

Anyone know where the touchscreen configuration is done in Tizen IVI?
I’m trying a different (more cost-effective, if I can get it working) 
touchscreen monitor, and its getting touch events, but they don’t match up with 
the Modello graphics. I can get pieces of the UI to react, but by touching 
other areas of the screen. I suspect both orientation and scale is incorrect 
for the touch sensor of the monitor…

-Brett
_______________________________________________
IVI mailing list
[email protected]
https://lists.tizen.org/listinfo/ivi
_______________________________________________
IVI mailing list
[email protected]
https://lists.tizen.org/listinfo/ivi

Reply via email to