Hi Michael. I did play with some the transform value, including ³flipped²
in conjunction with other values (the monitor has a flip option as well,
thinking that maybe a combo of it and westing flipping might make things
line up, but no success). However, to be clear, the graphics were oriented
properly in portrait with the transform=90 default value in the build I
was using. Just not sure that the transform line is properly affecting the
touch sensor, or if the touch sensor is just plain not calibrated at all.
Void is helping me find and run a utility, so hoping to provide an update
soonŠ and add to the wiki :-)
-Brett
On 11/17/14, 12:25 PM, "Michael Johnson"
<[email protected]> wrote:
>Hi Brett,
>
>Have you looked at the file /etc/xdg/weston/weston.ini? Screen
>configuration is usually done there. So to change orientation you could
>use transform=90 or transform=normal under the screen settings section.
>
>Someone else can probably give you more or better info, or you could do a
>search for an example weston.ini in the weston source code or elsewhere
>on the internet.
>
>Hope that helps a bit.
>
>
>MICHAEL JOHNSON
>Embedded Software Engineer
>
>Symphony Teleca
>Sunley House, 46 Jewry Street, Winchester, Hampshire, SO23 8RY
>Phone: +441962868866, Fax: +441962868867
>mailto:[email protected]
>http://www.symphonyteleca.com
>
>Teleca Limited, a company registered in England & Wales, registration
>number 2773878, registered office at Sunley House, 46 Jewry Street,
>Winchester, Hampshire SO23 8RY. VAT registration number GB 674 6583 90
>
>Follow what's going on at Symphony Teleca's blog on
>http://www.symphonyteleca.com/blog. Please consider the environment
>before you print.
>
>Notice to recipient: This e-mail (including any attachments) is meant for
>the intended recipient only, may contain confidential and proprietary
>information, and is protected by law. If you received this e-mail in
>error, please immediately notify the sender of the error by return
>e-mail, delete this communication and any attachments, and shred any
>printouts. Unauthorized review, use, dissemination, distribution, copying
>or taking of any action based on this communication is strictly
>prohibited.
>
>________________________________________
>From: IVI [[email protected]] on behalf of Branch, Brett
>[[email protected]]
>Sent: 17 November 2014 8:07 PM
>To: [email protected]
>Subject: Touchscreen configuration?
>
>Anyone know where the touchscreen configuration is done in Tizen IVI?
>I¹m trying a different (more cost-effective, if I can get it working)
>touchscreen monitor, and its getting touch events, but they don¹t match
>up with the Modello graphics. I can get pieces of the UI to react, but by
>touching other areas of the screen. I suspect both orientation and scale
>is incorrect for the touch sensor of the monitorŠ
>
>-Brett
>_______________________________________________
>IVI mailing list
>[email protected]
>https://lists.tizen.org/listinfo/ivi
_______________________________________________
IVI mailing list
[email protected]
https://lists.tizen.org/listinfo/ivi
